Daniel_san

well, I have a CDM cluster with 135000KM on it, and a JDM with a cluster.
I basically want to swap the speedo from the CDM cluster because of the mileage and because it goes to 220 instead of 180.

if I take out the speedo form the CDM cluster and put it in the JDM one, will it work ? because the wire map from the back doesn't look the same.

CDM cluster:


CDM speedo :



JDM cluster:


wire map (JDM is on top):



Modified by Daniel_san at 12:27 PM 4/26/2004

TurboBumblBee

all you need to do is make sure it fits in there and the 3 sckrews make contact w/ the board.. i dont know if your speedo is gonna be off now cause it a different setup unless the speedo part can tell that what kind of signal its getting from the sensor but if you look at it, 80 is straight up almost on one and then 90 is almost straight up

CIVIC dude

not sure if the CDM and JDM is gonna be a problem, but

i also have a CDM CX cluster, and i swapped the speedo part into a USDM EX cluster and it worked fine.

give it a try it should work !

ABK

My friend god a JDM cluster of SIRII it works fine on his cx with jdm d15b

Daniel_san

I know the whole cluster will work in my car. but I want to know if the speedo are interchangeable with the cluster, so that you can keep your mileage.

eg crunkmonster

I had an EX cluster and swapped my speedo from my CX cluster and it work..im pretty sure it will work because it should be the same wiring and it doesnt hurt to try...its just 3-4 screws

Daniel_san

I'll try it. it better work, becasue I'm also gluing the plastic cover to the cluster, I can't stand that skwicking noise !! it's driving me crazy !!

Daniel_san

this is for anybody that searches in the future,
it does work, so it seems that they all interchangeable



Modified by Daniel_san at 4:38 PM 4/26/2004