jdm sidemarkers
08-23-2002, 01:12 PM
#3
Honda-Tech Member
Join Date: Mar 2002
Location: 11,000 rpm daily, GA
Posts: 2,317
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (hybridreams)
Whereever, as long as it's the same spot on both sides.
i hate to use that car, but it's a good example.
[Modified by Plan B, 5:15 PM 8/23/2002]
i hate to use that car, but it's a good example.
[Modified by Plan B, 5:15 PM 8/23/2002]
08-24-2002, 12:10 PM
#5
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2001
Location: Magitek factory, Vector
Posts: 5,672
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (TOManegi)
burn in hell spanky theives.... the green bandicoot lives on!... yea but the go about an inch above your front fenders molding and an inch from the fenders edge..
08-24-2002, 12:33 PM
#6
Join Date: Mar 2002
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (feint_style)
here, this can help you. http://www.students.washington.edu/m.../side/side.htm
Trending Topics
01-12-2003, 01:11 AM
#9
Junior Member
Join Date: Jun 2002
Location: Los Angeles,, CA, United States
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (ernie)
here, this can help you. http://www.students.washington.edu/m.../side/side.htm
gettin some with a friend real soon and need to know how to do it.awww nm. got dat shiet right hur.
"http://students.washington.edu/kristic/honda/jdm/side/side.htm"
[Modified by rickske, 11:28 AM 1/12/2003]
01-12-2003, 01:41 PM
#10
Honda-Tech Member
Join Date: Apr 2002
Location: Bad Newz Kennels
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (rickske)
01-12-2003, 02:26 PM
#12
Honda-Tech Member
Join Date: Feb 2002
Location: SoCal 626, CA, USA
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (Spoon Hybrid)
Hehe definitely. I took a lot of pics of sidemarkers, to see how to correctly mount them, but the best measurement I came up with was to take the sidemarker and line up the bottom of the marker with the top line of the molding to start off with, and the unit of measurement I will use is (1 side-marker length) ok hehe, so once its lined up, move it up 1 and a half sidemarker lengths from where U started at. Basically you should be able to fit another sidemarker + half of one in between the top of the molding and the bottom of the sidemarker. The best measurement for left to right, is to use the end of the molding where its round. The end of the molding is the end of the sidemarker. Use a string with a weight to line it up pefectly, or a level if U have one. Hope that helps!!! Peace I made this up myself, but its almost as perfect as those tutorial guys, and their explanations are complicated, hehe. I just cant help you on the perfect cut for the fender. Those guys have that listed. 
01-12-2003, 05:43 PM
#14
New User
Join Date: Sep 2001
Location: Jdm, Y0, United States
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (Infamous_Imports)
Where can i buy a pair of those and how much?
[url=http://www.optauto.com
[Modified by SleeperEG6, 9:44 PM 1/12/2003]
[Modified by SleeperEG6, 9:44 PM 1/12/2003]
01-12-2003, 06:17 PM
#15
Member
Join Date: Nov 2002
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (ejprimo)
within this link it talks about a harness clip...what is this and where do i get it? i should be receiving my Stanley EK sidemarkers tomorrow and would like to install them asap...but haven't heard of this clip. any help?
01-15-2003, 12:31 PM
#16
Honda-Tech Member
Join Date: Feb 2002
Location: SoCal 626, CA, USA
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (2000CX)
most of the stanley sidemarkers have the clip already on the sidemarker. I dont know whats up with the EKs tho'. [B]and by the way, a good guy I know Andy sells all the JDM Stanley sidemarkers for every model...EG/DC2,BB/EK,DA,CB,CD,RS-X(DC5) FOR $40 on www.streetlightz.com[B]
[Modified by DjGuamstyle, 1:34 PM 1/15/2003]
[Modified by DjGuamstyle, 1:34 PM 1/15/2003]
01-22-2003, 03:35 PM
#17
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (DjGuamstyle)
heres a picture of mine...i forgot that i started this thread a while back...anyways here is how they turned out...that diagram in the link helped a lot
you can see then a little better on this pic
[Modified by 92hb, 8:01 AM 1/23/2003]
you can see then a little better on this pic
[Modified by 92hb, 8:01 AM 1/23/2003]
01-22-2003, 10:59 PM
#21
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (GetawayinMoscow)
I like your style white and black
, your white hatch looks exactly like mine, except i dont have the side markers . Where did u get them?
, your white hatch looks exactly like mine, except i dont have the side markers . Where did u get them?
holy crap, your mom drives and ITR!
01-22-2003, 11:20 PM
#23
Thread Starter
Join Date: Feb 2002
Location: U S of Fuckin Eh
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm sidemarkers (Peagreenhatch)
right.... about...... THERE!
01-23-2003, 04:42 AM
#25
Honda-Tech Member
Re: jdm sidemarkers (93 EJ1)
Tryed to take some pics but they did not turn out to good but here you go.
"REAL EG FENDER"
#4 on lower edge of the molding hole
#7 on the edge
"REAL EG FENDER"
#4 on lower edge of the molding hole
#7 on the edge