**How To** Install H23 Intake Manifold onto F22B1 head
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
**How To** Install H23 Intake Manifold onto F22B1 head
I searched and didnt find one on HT so I did it and here is how-
H23 IM gasket on F22B1 IM(port comparison)-
Template made from tracing the F22B1 IM flange onto a manilla folder-
H23 flange marked for cutting-
H23 flange cut(hack saw and dremel)-
H23 IM mounted to F22B1 head and clearing Vtec solinoid-
Next up head goes to machine shop for cleaning and IM port matching.
I have more in store and will update as I make progress.
Hope this helps anyone interested in doing this.
***H23 IM only 30.00 shipped off Ebay, pretty cheap upgrade.***
Modified by DC4_MADMAN at 7:42 PM 11/9/2006
H23 IM gasket on F22B1 IM(port comparison)-
Template made from tracing the F22B1 IM flange onto a manilla folder-
H23 flange marked for cutting-
H23 flange cut(hack saw and dremel)-
H23 IM mounted to F22B1 head and clearing Vtec solinoid-
Next up head goes to machine shop for cleaning and IM port matching.
I have more in store and will update as I make progress.
Hope this helps anyone interested in doing this.
***H23 IM only 30.00 shipped off Ebay, pretty cheap upgrade.***
Modified by DC4_MADMAN at 7:42 PM 11/9/2006
#2
Honda-Tech Member
Join Date: Dec 2005
Location: modesto, ca, u.s.a.
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
nice but question on the top pic the two water ports dont align up ryt how do you plan on getting around this?
#3
Honda-Tech Member
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">***H23 IM only 30.00 shipped off Ebay, pretty sheap upgrade.***</TD></TR></TABLE>
It is looking good
Those ports on the head have to be ported out. You get the specs on the cam you are going to run?
It is looking good
Those ports on the head have to be ported out. You get the specs on the cam you are going to run?
#4
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">nice but question on the top pic the two water ports dont align up ryt how do you plan on getting around this?</TD></TR></TABLE>
The ports will be plugged.
The ports will be plugged.
#5
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (Turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
It is looking good
Those ports on the head have to be ported out. You get the specs on the cam you are going to run?
</TD></TR></TABLE>
I have not chosen a cam yet. i have to call a few places next week. Also need to get valve springs. The head will be port matched.
It is looking good
Those ports on the head have to be ported out. You get the specs on the cam you are going to run?
</TD></TR></TABLE>
I have not chosen a cam yet. i have to call a few places next week. Also need to get valve springs. The head will be port matched.
#7
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">so you plan on starving the head</TD></TR></TABLE>
That port goes to the Tstat housing, all blocking that passage will do is keep the hot coolant from the head opening the Tstat. There are ways around this.
That port goes to the Tstat housing, all blocking that passage will do is keep the hot coolant from the head opening the Tstat. There are ways around this.
Trending Topics
#8
Honda-Tech Member
Join Date: Dec 2005
Location: modesto, ca, u.s.a.
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
and what of thouse small pipes to the fast idle valve ans eciav or what ever it is called
#9
Honda-Tech Member
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">
That port goes to the Tstat housing, all blocking that passage will do is keep the hot coolant from the head opening the Tstat. There are ways around this.</TD></TR></TABLE>
You could cut the manifold, and tap in a nipple to run to the thermostat housing.
Your head profile will help your cam choice.
That port goes to the Tstat housing, all blocking that passage will do is keep the hot coolant from the head opening the Tstat. There are ways around this.</TD></TR></TABLE>
You could cut the manifold, and tap in a nipple to run to the thermostat housing.
Your head profile will help your cam choice.
#10
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">and what of thouse small pipes to the fast idle valve ans eciav or what ever it is called</TD></TR></TABLE>
Not useing them.
Not useing them.
#11
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (Turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
You could cut the manifold, and tap in a nipple to run to the thermostat housing.
Your head profile will help your cam choice.</TD></TR></TABLE>
Yeah I thought of that too, but NAH.
You could cut the manifold, and tap in a nipple to run to the thermostat housing.
Your head profile will help your cam choice.</TD></TR></TABLE>
Yeah I thought of that too, but NAH.
#12
Honda-Tech Member
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">and what of thouse small pipes to the fast idle valve ans eciav or what ever it is called</TD></TR></TABLE>
All that stuff can be bypassed.
All that stuff can be bypassed.
#13
Honda-Tech Member
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">
Yeah I thought of that too, but NAH. </TD></TR></TABLE>
Lazy
Yeah I thought of that too, but NAH. </TD></TR></TABLE>
Lazy
#15
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (Turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
Lazy </TD></TR></TABLE>
Little bit. Easier to just punch a few holes in the T-stat.
Lazy </TD></TR></TABLE>
Little bit. Easier to just punch a few holes in the T-stat.
#17
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">and as for the cam profile are you gonna keep it stock ?</TD></TR></TABLE>
Nope. The motor will have 11.5:1 CR, so running the stocker is out. Most likely end up running something from Web Cams.
Nope. The motor will have 11.5:1 CR, so running the stocker is out. Most likely end up running something from Web Cams.
#19
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (BlUAc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlUAc »</TD></TR><TR><TD CLASS="quote">11:5 comp in an f sweet</TD></TR></TABLE>
Actually its not an F(well, the head is), but thats another writup for another day.
Actually its not an F(well, the head is), but thats another writup for another day.
#22
Honda-Tech Member
Re: **How To** Install H23 Intake Manifold onto F22B1 head (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">it's about time you do something techinical
Who's porting it?</TD></TR></TABLE>
DHR
Who's porting it?</TD></TR></TABLE>
DHR
#23
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (Turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
DHR</TD></TR></TABLE>
OH SNAP!!!
I million WHP increase FTW!!!!!!
DHR</TD></TR></TABLE>
OH SNAP!!!
I million WHP increase FTW!!!!!!
#24
Honda-Tech Member
Thread Starter
Join Date: May 2005
Posts: 4,491
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">it's about time you do something techinical
Who's porting it?</TD></TR></TABLE>
hahahahaha.
Im not sure on the porter yet. yeah, it WONT be DHR though.
Who's porting it?</TD></TR></TABLE>
hahahahaha.
Im not sure on the porter yet. yeah, it WONT be DHR though.
#25
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: **How To** Install H23 Intake Manifold onto F22B1 head (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">
hahahahaha.
Im not sure on the porter yet. yeah, it WONT be DHR though.</TD></TR></TABLE>
thats allot of port work
hahahahaha.
Im not sure on the porter yet. yeah, it WONT be DHR though.</TD></TR></TABLE>
thats allot of port work