OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
#1
Thread Starter
iTrader: (3)
OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
Contact
Email -- James@IPGParts.com
Phone -- 407-324-4684
PM
We have 6 Pairs of these available -- that is it !!!!
$295 shipped in the continental 48 states
Brand New Omni Power USA Front Lower Controls arms for any 1992-1995 Honda Civic, 1994-2001 Acura Integra.
Save Weight !!!!
Unique only to the Omni-Power product line, our light weight front lower control arms (FLCA's) are forged with certified T6-2014 aluminum (100% stronger than 6061-T6). Pure polyurethane bushings are used that wont squeak or crack like other poly bushings that use fillers to cut costs. Each control arm is then hard anodized to eliminate corrosion and maintain a show quality look. Omni-Power uses a solid design for added strength and is the only company to offer an aluminum FLCA for EG and DC model vehicles. These FLCA's are a direct replacement for the front 2 piece design and require no modifications for an easy install. Typical weight savings is approximately 8 pounds depending on the vehicle model. Each nut or bolt attaching the FLCA to the vehicle including the ball joint torques to 38 ft/lbs + or - 2 ft/lbs. If ball joint removal is required to change an axle or other part, use of a pickle fork is needed. Never use a hammer to release the ball joint from the FLCA, as this will damage the FLCA and may cause it to fail. Tested and developed on 1000 HP drag race cars as well as road and auto-x vehicles. This part is suitable for street and track use and is equal in strength to the OEM counter part when installed correctly. You won’t find a higher quality front aluminum control arm anywhere.
Contact
Email -- James@IPGParts.com
Phone -- 407-324-4684
PM
We have 6 Pairs of these available -- that is it !!!!
$295 shipped in the continental 48 states
Email -- James@IPGParts.com
Phone -- 407-324-4684
PM
We have 6 Pairs of these available -- that is it !!!!
$295 shipped in the continental 48 states
Brand New Omni Power USA Front Lower Controls arms for any 1992-1995 Honda Civic, 1994-2001 Acura Integra.
Save Weight !!!!
Unique only to the Omni-Power product line, our light weight front lower control arms (FLCA's) are forged with certified T6-2014 aluminum (100% stronger than 6061-T6). Pure polyurethane bushings are used that wont squeak or crack like other poly bushings that use fillers to cut costs. Each control arm is then hard anodized to eliminate corrosion and maintain a show quality look. Omni-Power uses a solid design for added strength and is the only company to offer an aluminum FLCA for EG and DC model vehicles. These FLCA's are a direct replacement for the front 2 piece design and require no modifications for an easy install. Typical weight savings is approximately 8 pounds depending on the vehicle model. Each nut or bolt attaching the FLCA to the vehicle including the ball joint torques to 38 ft/lbs + or - 2 ft/lbs. If ball joint removal is required to change an axle or other part, use of a pickle fork is needed. Never use a hammer to release the ball joint from the FLCA, as this will damage the FLCA and may cause it to fail. Tested and developed on 1000 HP drag race cars as well as road and auto-x vehicles. This part is suitable for street and track use and is equal in strength to the OEM counter part when installed correctly. You won’t find a higher quality front aluminum control arm anywhere.
Contact
Email -- James@IPGParts.com
Phone -- 407-324-4684
PM
We have 6 Pairs of these available -- that is it !!!!
$295 shipped in the continental 48 states
Last edited by Innes; 11-20-2009 at 12:15 PM.
#5
Honda-Tech Member
Join Date: Dec 2002
Location: Albany, NY
Posts: 8,009
Likes: 0
Received 0 Likes
on
0 Posts
Re: OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
do these allow you to run the swaybar as well? I guess I'm not picturing it correctly in my head when it says replaces the 2 piece oem arm completely
Trending Topics
#17
Junior Member
iTrader: (1)
Join Date: Mar 2008
Location: Portland, OR
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Re: OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
i take it these are out of stock now? pm me if they are in stock becaus im placing an order right now
#22
Honda-Tech Member
Join Date: May 2005
Location: Columbus, ga
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Re: OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
Hey man do you guys stock omni power coilovers? lookin for a set for a 97 Civic.
#25
Junior Member
Join Date: Oct 2008
Location: Aventura, Flordia, United States
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: OMNI POWER OMNIPOWER Front Lower Control Arms -- Civic -- Integra -- FLCA
Got a 2000 EK JDM RHD CTR will these fit on my car?
Got any left?
Got any left?