2.50" x 2.50" CLR 90º
03-05-2008, 08:03 PM
#3
Honda-Tech Member
Join Date: Jun 2006
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.50" x 2.50" CLR 90º (jDMJeRk)
woolf aircraft 
http://www.woolfaircraft.com
I noticed your sig, we are working with turbo people right now on a new EMS
http://www.woolfaircraft.com
I noticed your sig, we are working with turbo people right now on a new EMS
03-05-2008, 10:36 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.50" x 2.50" CLR 90º (TurboSI56)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboSI56 »</TD></TR><TR><TD CLASS="quote">woolf aircraft
http://www.woolfaircraft.com
I noticed your sig, we are working with turbo people right now on a new EMS </TD></TR></TABLE>
I tried them but they make them even TIGHTER.. 2.25"
Their prices are a little steep too.. $2*.** is too much.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k24em2 »</TD></TR><TR><TD CLASS="quote">what material? </TD></TR></TABLE>
Mild Steel or Aluminized if we had too.
http://www.woolfaircraft.com
I noticed your sig, we are working with turbo people right now on a new EMS
</TD></TR></TABLE>I tried them but they make them even TIGHTER.. 2.25"
Their prices are a little steep too.. $2*.** is too much.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k24em2 »</TD></TR><TR><TD CLASS="quote">what material? </TD></TR></TABLE>
Mild Steel or Aluminized if we had too.
03-06-2008, 08:58 AM
#5
Honda-Tech Member
Join Date: Oct 2004
Location: Pacoima, CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.50" x 2.50" CLR 90º (jDMJeRk)
It takes a different kind of machine to bend 2.5" that tight a much more expensive one. I would think the bends wouldn't be cheap.
03-06-2008, 10:55 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.50" x 2.50" CLR 90º (danielm3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">It takes a different kind of machine to bend 2.5" that tight a much more expensive one. I would think the bends wouldn't be cheap. </TD></TR></TABLE>
Usually I get them for about 10.xx or 11.xx.
Usually I get them for about 10.xx or 11.xx.
Thread
Thread Starter
Forum
Replies
Last Post