Some bent tubing welded together.......
#2
Re: Some bent tubing welded together....... (bigTom)
looks great!
is there just a plate on the exhaust tunnel where the two d-bars meet up? i was always under the impression that we needed a lower cross bar that the two d-bars can connect to near the exhaust tunnel. thank you
is there just a plate on the exhaust tunnel where the two d-bars meet up? i was always under the impression that we needed a lower cross bar that the two d-bars can connect to near the exhaust tunnel. thank you
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2000
Location: Zoo York
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
thanks.
I'v read here on h-tech that you need them. Don't believe everything you read here as much of it can be nonsense. Everything must be taken with a grain of salt. When NHRA revises their rulebook to include that bar; then it will be required.
I'v read here on h-tech that you need them. Don't believe everything you read here as much of it can be nonsense. Everything must be taken with a grain of salt. When NHRA revises their rulebook to include that bar; then it will be required.
#6
Honda-Tech Member
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (bigTom)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigTom »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
NICE fasteners!!! NAS certified
</TD></TR></TABLE>
NICE fasteners!!! NAS certified
Trending Topics
#9
Honda-Tech Member
Re: Some bent tubing welded together....... (bigTom)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigTom »</TD></TR><TR><TD CLASS="quote"> Comments?
</TD></TR></TABLE>
do something with that "cage" hangin on the ceiling
</TD></TR></TABLE>
do something with that "cage" hangin on the ceiling
#10
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (B18EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18EG6 »</TD></TR><TR><TD CLASS="quote">
NICE fasteners!!! NAS certified </TD></TR></TABLE>
yes they are. dont really have to worry about the bolt breaking
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
do something with that "cage" hangin on the ceiling </TD></TR></TABLE>
we barely get to sleep, never mind work on our own cars.
We have talked about making it into a video game seat
NICE fasteners!!! NAS certified </TD></TR></TABLE>
yes they are. dont really have to worry about the bolt breaking
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote">
do something with that "cage" hangin on the ceiling </TD></TR></TABLE>
we barely get to sleep, never mind work on our own cars.
We have talked about making it into a video game seat
#11
Honda-Tech Member
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (miller)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miller »</TD></TR><TR><TD CLASS="quote">
yes they are. dont really have to worry about the bolt breaking
</TD></TR></TABLE>
If you don't mind - where did you purchase them from?
yes they are. dont really have to worry about the bolt breaking
</TD></TR></TABLE>
If you don't mind - where did you purchase them from?
#12
Honda-Tech Member
Re: Some bent tubing welded together....... (B18EG6)
What do you guys think about mounting the parachute anchor higher? I just purchased the stroud fwd parachute last week and in conversation with one of there techs they say that we should start to mount our anchors higher to help from pulling the car up. If you look at alot of the pro fwd cars especially GM you'll see that the mounts are up in the trunk lid.
#13
Honda-Tech Member
Re: Some bent tubing welded together....... (HR-1320)
Yes, definitely, after doing a few and driving them, the tag line definitely needs to be high. Otherwise it's a hell of a ride when the chute hits! lol
#15
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Yes, definitely, after doing a few and driving them, the tag line definitely needs to be high. Otherwise it's a hell of a ride when the chute hits! lol</TD></TR></TABLE>
How much higher are we talking about Tony? Im thinking about putting a chute on my car let me know..
the cage looks great by the way very nice work. One of these day that D-Bar rule is going to get cleared up i swear...
How much higher are we talking about Tony? Im thinking about putting a chute on my car let me know..
the cage looks great by the way very nice work. One of these day that D-Bar rule is going to get cleared up i swear...
#16
Honda-Tech Member
Re: Some bent tubing welded together....... (Six Sigma Racing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Six Sigma Racing »</TD></TR><TR><TD CLASS="quote">
How much higher are we talking about Tony? Im thinking about putting a chute on my car let me know..
</TD></TR></TABLE>
are you thinkin about putting a TURBO on there tooo ??
How much higher are we talking about Tony? Im thinking about putting a chute on my car let me know..
</TD></TR></TABLE>
are you thinkin about putting a TURBO on there tooo ??
#17
Honda-Tech Member
Re: Some bent tubing welded together....... (Six Sigma Racing)
Haha, yeah, get outta here with that noise until you put a turbo on your car Danny.
Seriously though, our cars are so light in the back and i think the higher you can get the tag line the better. Going "too" high will just pull the rear of the car down more, which isn't so much of a bad thing as far as i can tell.
Seriously though, our cars are so light in the back and i think the higher you can get the tag line the better. Going "too" high will just pull the rear of the car down more, which isn't so much of a bad thing as far as i can tell.
#18
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Haha, yeah, get outta here with that noise until you put a turbo on your car Danny.
Seriously though, our cars are so light in the back and i think the higher you can get the tag line the better. Going "too" high will just pull the rear of the car down more, which isn't so much of a bad thing as far as i can tell.</TD></TR></TABLE>
So i finally get it.. i got to put a turbo on my car to get help from you.. haha I dont think that no too bad of an idea but to behonest i like all motor better.. thanks again..
Seriously though, our cars are so light in the back and i think the higher you can get the tag line the better. Going "too" high will just pull the rear of the car down more, which isn't so much of a bad thing as far as i can tell.</TD></TR></TABLE>
So i finally get it.. i got to put a turbo on my car to get help from you.. haha I dont think that no too bad of an idea but to behonest i like all motor better.. thanks again..
#21
Honda-Tech Member
Join Date: Dec 2002
Location: portsmouth, va, usa
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (Six Sigma Racing)
my car and 4 others failed the test today because they did not have the new style d bar . the guy said the cages passed every where else but we had to cut the old one out and put the new style in . when i asked where in the rule book it was he said its not even in the sfi book he had . plus he could not tell us the correct way to do it he pretty much said this is how i would do it and it should be fine .so i contacted nhra and its being looked at plus he said he would see what he could do kind of hard to in force a rule thats not in a rule book but he could not put stickers on the cars
#22
Honda-Tech Member
Re: Some bent tubing welded together....... (bob menuts)
WTF? That can't be right. How in the hell are you going to enforce a rule that's not in writing? Should we just guess what size tubing to use and where it goes and cross our fingers or what? lol
#23
Honda-Tech Member
Join Date: Dec 2002
Location: portsmouth, va, usa
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">WTF? That can't be right. How in the hell are you going to enforce a rule that's not in writing? Should we just guess what size tubing to use and where it goes and cross our fingers or what? lol</TD></TR></TABLE>pretty much the same thing i said to him but nicely all hey had was a memo it said what size bar but was very vaige on how to install it
#25
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some bent tubing welded together....... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Haha, wonder when they're going to send that memo out to the rest of the world. </TD></TR></TABLE>
I got the memo... jk yeah they need to update that **** in the rule book becuase i don't want to do it either but hey its better to have it so that any inspector that looks at is can't say it done wrong...
I got the memo... jk yeah they need to update that **** in the rule book becuase i don't want to do it either but hey its better to have it so that any inspector that looks at is can't say it done wrong...