first collector imput wanted
#1
Thread Starter
Join Date: Jun 2003
Location: plattsurgh, ny, usa
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
first collector imput wanted
this is the first collector i have ever built i got like 8-10 hours in it aney imput on how to improve this for my next ones would be greatly apreciated im hopping to get my jig all figured out so the pieces fit a little better they had 1/16 gaps in places. also aney imput on my welds would be apreciated im welding them with a lincoln sp125 so its pretty maxed out. i tried to notch everything before i welded this helped greatly with penitration.
i need to clean it up i polished the inside thenwelded the cap in the center and the splater got all over the iside again
i need to clean it up i polished the inside thenwelded the cap in the center and the splater got all over the iside again
#4
Re: (HeyMikeyyyy)
welding the inside is easy with a mig. The trick is starting at the top and working downward. Some how I pull off the best beads on the inside, vertical seams dispite limited room and a bad gun angle.
#5
Thread Starter
Join Date: Jun 2003
Location: plattsurgh, ny, usa
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Bailhatch)
my next one il try to weld the inside and polish it out and make it seemless i am hoping to start selling these on ebay and whatnot how much would you think they would sell for or would they even sell im hoping to get a tig welder within the month and start going to town on manifolds just all the parts jigs bends and whatnot are weighing down my wallet
Thread
Thread Starter
Forum
Replies
Last Post