DIY Plain/Spherical Bearings for Suspension?
#1
Honda-Tech Member
Thread Starter
DIY Plain/Spherical Bearings for Suspension?
Has anyone done their own plain/spherical bearings for front LCAs, front UCAs, rear LCAs, ITR shock eyelets, rear camber arms, rear toe arms, or even rear trailing arm, or front compliance bushings?
I know of Kingpin, PCI, ESM, and the cheap-o stuff.
I'm a big fan of Kingpin myself, but I'm low buck as well
Thanks..
I know of Kingpin, PCI, ESM, and the cheap-o stuff.
I'm a big fan of Kingpin myself, but I'm low buck as well
Thanks..
#2
-Intl Steve Krew
Re: DIY Plain/Spherical Bearings for Suspension?
You have access to some calipers and some bushings?
Do you know how to run a lathe?
If yes, then you could probably whip up some nice bushings!
Do you know how to run a lathe?
If yes, then you could probably whip up some nice bushings!
#3
Honda-Tech Member
Thread Starter
Re: DIY Plain/Spherical Bearings for Suspension?
I do not have a lathe, but I have a press, a caliper, and some common sense. I'm hoping I can do this as an off-season project but i need to find someone who can machine the sleeves.
Thread
Thread Starter
Forum
Replies
Last Post
J.HA
Honda Civic / Del Sol (1992 - 2000)
3
07-08-2010 01:42 PM
Scrpn17w
Honda CRX / EF Civic (1988 - 1991)
3
04-01-2009 06:28 PM
Angry Joe
Road Racing / Autocross & Time Attack
6
11-10-2003 01:56 PM