A couple manifolds i've been working on...
 

These are both with 321 stainless from burns, the honda one 16ga, the celica 18ga. The celica one uses a burns double slip collector and an undivided turbine housing. The honda one uses a split turbine housing so I built the collector to put 1&4 into one side of the housing and 2&3 into the other. The honda one uses 2 gates cause it needs to with two seperate chambers, and we will need both to get the boost down low enough to hook up. The celica one will just need one gate, as we don't ever plan to be much below 30psi!
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re: A couple manifolds i've been working on... (tony1)
 

How come a Change in Design From the first Celica header?

Edit: n/m

Re: A couple manifolds i've been working on... (tony1)
 

i want one with the dual gates...but i need to keep ac and ps https://honda-tech.com/forums/images/smilies/emwink.gif
jk, nice https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (This One)
 

The first celica header had different port locations so it worked out better this way. I like this one better though.

Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol https://honda-tech.com/forums/images...s/emsmilep.gif Thanks man. https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (tony1)
 

lol

I guess this is for Sideburns' (Rado) car?

Re: A couple manifolds i've been working on... (tony1)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">I call it half-race cause i'm not as good as you guys! lol https://honda-tech.com/forums/images...s/emsmilep.gif Thanks man. https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>
haha https://honda-tech.com/forums/images...es/emsmile.gif

the mani's look great man https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (Smokinsax)
 

on a side note, are you going to coat the manifolds, or you not that into coating?

Re: A couple manifolds i've been working on... (tony1)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">The first celica header had different port locations so it worked out better this way. I like this one better though.

Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol https://honda-tech.com/forums/images...s/emsmilep.gif Thanks man. https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>

3 weeks after your release you will see clones of your manifold peddled through these boards..hehe http://images.honda-tech.com/set1//smile/emcrook.gif

pimpass manifolds, so i guess u guys gonna need a new heatshield for the new celica mani huh? https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (tony1)
 

i saw pics of that a while back in turbo magazine when you were starting on it! i was curious how it would turn out, looks damb good... https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (Bob-DC2)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob-DC2 &raquo;</TD></TR><TR><TD CLASS="quote">on a side note, are you going to coat the manifolds, or you not that into coating?</TD></TR></TABLE>

I firmly believe in coating the manifolds, but neither of them have been done yet.

Re: A couple manifolds i've been working on... (tony1)
 

Beautiful, man! https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (Stoney)
 

Excellent work! Your using an Aerowave or a 350LX arn't you?

Re: A couple manifolds i've been working on... (tony1)
 

Why cant I stop looking https://honda-tech.com/forums/images...s/emsmileo.gif

Re: A couple manifolds i've been working on... (legendboy)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by legendboy &raquo;</TD></TR><TR><TD CLASS="quote">Excellent work! Your using an Aerowave or a 350LX arn't you?</TD></TR></TABLE>

Miller Syncrowave 250, but i really want the Dynasty 300.

Re: A couple manifolds i've been working on... (tony1)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">

Miller Syncrowave 250, but i really want the Dynasty 300.</TD></TR></TABLE>
theres one on e-bay right now!

Re: A couple manifolds i've been working on... (fab1)
 

Looks great tony! https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (This One)
 

You do amazing work.

Re: A couple manifolds i've been working on... (BrownDx)
 

the only problem with tony making headers is... he doesnt buy them from me anymore. https://honda-tech.com/forums/images/smilies/emsad.gif no love. jay kay jay kay, i still love you and your work. =D https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (tony1)
 

Tony, if I had a dollar for everytime I saw stuff that you have built and I said to myself, "damn I wanna learn how to do this"...... id have alot of money. https://honda-tech.com/forums/images...s/emsmilep.gif NICE WORK! https://honda-tech.com/forums/images/smilies/emthup.gif

PRODRAGS MANI!..looks nice TONY!

-Jesse Walker

Re: A couple manifolds i've been working on... (tony1)
 

Tony1, amazing work, I love those manifolds

Re: A couple manifolds i've been working on... (P.Winkowski)
 

Thanks for the props guys, the intake manifold is next.... https://honda-tech.com/forums/images/smilies/emwink.gif https://honda-tech.com/forums/images/smilies/emthup.gif

Re: A couple manifolds i've been working on... (tony1)
 

It's all in the collector lol https://honda-tech.com/forums/images/smilies/emthup.gif

Beautiful work

Re: A couple manifolds i've been working on... (eLusive ek4)
 

why'd you go to a thinner gauge on the celica vs. the honda?