Block Sleeve Question
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Las Vegas, Nevada, USA
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Block Sleeve Question
Sorry bout the pics best i could get lol. Anyhow heres the story, i just purchased a benson sleeved block from someone on H-T only had 300miles on it. anyhow when i looked at the sleeves they have this copperish color ring on them toward the top. he told me it was from his copper headgasket spray he put to much and it went in, anyhow its like imbedded in the sleeves i tryed wd-40 to see if it was rust or something, also tryed a scotch brite no scratch pad, didnt really do anything. i was just curious if u guys think its anything or if it will affect anything i dont wanna put everything together and kaboom goes my motor. If i rub my nail i dont feel anything. In some spots i wonder if i do feel something or if its just combustion since its so close to where combustion build up is on the sleeve.I also couldnt understand how it is a perfect ring. Anyhow thanks for the insight.
Modified by Project99EK at 5:56 PM 8/21/2006
Modified by Project99EK at 5:56 PM 8/21/2006
Thread
Thread Starter
Forum
Replies
Last Post