Wtb: b series sleeved shortblock
#3
Honda-Tech Member
Re: Wtb: b series sleeved shortblock
I have a short block or can sell as whole long block 83x89 arias piston crowler bilet I beam rods aebs sleeves hd 40psi+ pins. have ported and non ported p72 heads pro 1 cams and blox p1 heads have full valve train. also have new 2200cc injectors
#5
Honda-Tech Member
iTrader: (9)
Re: Wtb: b series sleeved shortblock
Im waiting on my block from JBRe, 81mm sleeved gsr block. I have wiseco 10:1 pistons, eagle rods, gsr crank, king bearings, oil pan with 10an drain, je pro seal hg.
I'd entertain selling it disassembled.
I'd also sell the gsr head as well.
Ive lost interest in finishing the build.
Located in KCMO
I'd entertain selling it disassembled.
I'd also sell the gsr head as well.
Ive lost interest in finishing the build.
Located in KCMO
#6
Re: Wtb: b series sleeved shortblock
Im waiting on my block from JBRe, 81mm sleeved gsr block. I have wiseco 10:1 pistons, eagle rods, gsr crank, king bearings, oil pan with 10an drain, je pro seal hg.
I'd entertain selling it disassembled.
I'd also sell the gsr head as well.
Ive lost interest in finishing the build.
Located in KCMO
I'd entertain selling it disassembled.
I'd also sell the gsr head as well.
Ive lost interest in finishing the build.
Located in KCMO
#7
Honda-Tech Member
iTrader: (9)
Re: Wtb: b series sleeved shortblock
just the bottom end stuff?
$2k, unassembled. Picked up. Block, crank, rods, BNIB 81.5 wisecos, BNIB king bearings, BNIB 81.5 JE proseal, pan, pick up, windage tray. NO oil pump. I sent the pistons with the block to JBR so theyre machined/clearanced/speced together. Bore/hone with deckplate. Still waiting on block to come back from JBR
The gsr head I just had supertech springs and retainers installed, will come with gsr cams, valve cover, vtec solenoid, no distributor (my car coil on plug) or intake. Head is stock port, stock valve.
$2k, unassembled. Picked up. Block, crank, rods, BNIB 81.5 wisecos, BNIB king bearings, BNIB 81.5 JE proseal, pan, pick up, windage tray. NO oil pump. I sent the pistons with the block to JBR so theyre machined/clearanced/speced together. Bore/hone with deckplate. Still waiting on block to come back from JBR
The gsr head I just had supertech springs and retainers installed, will come with gsr cams, valve cover, vtec solenoid, no distributor (my car coil on plug) or intake. Head is stock port, stock valve.
Trending Topics
#8
Honda-Tech Member
Re: Wtb: b series sleeved shortblock
pics in sell ad I got.
Thread
Thread Starter
Forum
Replies
Last Post