FS: 2000 flameco black ITR..fully built turbod #1411
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2000 flameco black ITR..built turbod #1411
FS: 2000 flameco black ITR..built, turbo #1411. okay guys..made up my mind..decided to sell the car..heres alittle bit about the car..motor is done, CAR IS TUNED and DONE..car made 470hp and 380 FT/tq at 19psi.. on E85, CRAZY conservative tune, tuned by JORDAN from Consummate Tuning in MN. very well known tuner in MN..he tuned many many honda's before..he says the motor runs very strong, can easily take it to 600hp but ran out of tuning time.will post dyno chart this weekend..ASKING PRICE <U>$16,500 obo </U>im located in Lacrosse, WI..call and ask for more details..608-738-1667. ask for joe moua or email for more info..i tend to reply to emails faster.. THIS THING IS A STEAL!! SOME ONE PICK IT UP ASAP!! I NEED TO PAY BILLS AND LOANS!!
joe_moua@hotmail.com
<U>SOLD</U>
2000 ITR # 1411
flamenco black
50k miles on chasis
Stock ITR head with about 50k miles
Import Builders Fully built block whith GE sleeves / 0 miles
2.0L 84.5mm bore
9:1 compression
IB spec rods with ARP rod bolts
GE 84.5mm headgasket
GE Turbo oil feed kit
GE vacuum manifold
edlebrock IM
Full Race Stage 3 Turbo kit (t3/t67) A/C kit
Full Race Traction bars
Turbo XS dual boost controller
Greddy turbo timer
AEM EMS
AEM Fuel rail
AEM FPR
AEM Fuel filter
AEM fuel pressure guage
MSD Digital 6 with cap, wires, and blaster
RC 1000cc P/H injectors
Walbro 255
PWR radiator
stock ITR trans with OEM LSD
ACT 6 puck sprung
ACT street lite flywheel
ACT extreme pressure plate
Hasport motor mounts
Thermal 3" exhaust
Auto meter Guages
water temp, oil pressure, fuel pressure, oil temp
AEM wide band
Stock suspension
stock wheels with falk azenis
Stock interior (very good condition i say 10/10)
few little knicks on the bumper..car's been garaged for quite a while
Modified by VRD^don at 10:11 PM 9/3/2007
Modified by VRD^don at 10:11 PM 9/3/2007
Modified by VRD^don at 11:35 AM 9/4/2007
Modified by VRD^don at 5:20 PM 9/5/2007
Modified by VRD^don at 11:30 PM 10/3/2007
Modified by VRD^don at 12:36 AM 3/26/2008
Modified by VRD^don at 12:51 AM 3/26/2008
Modified by VRD^don at 6:25 PM 4/2/2008
joe_moua@hotmail.com
<U>SOLD</U>
2000 ITR # 1411
flamenco black
50k miles on chasis
Stock ITR head with about 50k miles
Import Builders Fully built block whith GE sleeves / 0 miles
2.0L 84.5mm bore
9:1 compression
IB spec rods with ARP rod bolts
GE 84.5mm headgasket
GE Turbo oil feed kit
GE vacuum manifold
edlebrock IM
Full Race Stage 3 Turbo kit (t3/t67) A/C kit
Full Race Traction bars
Turbo XS dual boost controller
Greddy turbo timer
AEM EMS
AEM Fuel rail
AEM FPR
AEM Fuel filter
AEM fuel pressure guage
MSD Digital 6 with cap, wires, and blaster
RC 1000cc P/H injectors
Walbro 255
PWR radiator
stock ITR trans with OEM LSD
ACT 6 puck sprung
ACT street lite flywheel
ACT extreme pressure plate
Hasport motor mounts
Thermal 3" exhaust
Auto meter Guages
water temp, oil pressure, fuel pressure, oil temp
AEM wide band
Stock suspension
stock wheels with falk azenis
Stock interior (very good condition i say 10/10)
few little knicks on the bumper..car's been garaged for quite a while
Modified by VRD^don at 10:11 PM 9/3/2007
Modified by VRD^don at 10:11 PM 9/3/2007
Modified by VRD^don at 11:35 AM 9/4/2007
Modified by VRD^don at 5:20 PM 9/5/2007
Modified by VRD^don at 11:30 PM 10/3/2007
Modified by VRD^don at 12:36 AM 3/26/2008
Modified by VRD^don at 12:51 AM 3/26/2008
Modified by VRD^don at 6:25 PM 4/2/2008
#6
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MattHonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 7808 »</TD></TR><TR><TD CLASS="quote">just curious, why are you looking to trade not sell a car you just built?
nice car </TD></TR></TABLE>
spent too much money on it...looking to buy a house at the moment..if i dont get a good offer then i'll probably keep it..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MattHonda »</TD></TR><TR><TD CLASS="quote">Clean, any more pics ?</TD></TR></TABLE>
thanks...none at the moment..i'll get some soon..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by siblueg »</TD></TR><TR><TD CLASS="quote">pm sent</TD></TR></TABLE>
pm u back
nice car </TD></TR></TABLE>
spent too much money on it...looking to buy a house at the moment..if i dont get a good offer then i'll probably keep it..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MattHonda »</TD></TR><TR><TD CLASS="quote">Clean, any more pics ?</TD></TR></TABLE>
thanks...none at the moment..i'll get some soon..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by siblueg »</TD></TR><TR><TD CLASS="quote">pm sent</TD></TR></TABLE>
pm u back
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 2000 flameco black ITR..built turbod #1411 (VRD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fast_96gsr »</TD></TR><TR><TD CLASS="quote">bump you have pm</TD></TR></TABLE>
pm'd...up!!
pm'd...up!!
#11
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 2000 flameco black ITR..built turbod #1411 (yaaj1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yaaj1320 »</TD></TR><TR><TD CLASS="quote">u will b happy with the block man....made some insane power with they block..</TD></TR></TABLE>
either way im just testing waters...dont really want to sell...i know the block can handle serious amounts of power..
either way im just testing waters...dont really want to sell...i know the block can handle serious amounts of power..
#15
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 2000 flameco black ITR..built turbod #1411 (I'mEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I’mEK »</TD></TR><TR><TD CLASS="quote">Bump for a buddy!</TD></TR></TABLE>
THANKS BRO!!!
THANKS BRO!!!
#19
Honda-Tech Member
Re: TW: 2000 flameco black ITR..built turbod #1411 (VRD)
Bumps for a very clean R. i've seen it in person drove it in person. you guys wont be dissappointed...
#24
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: VRD_garage, mn, us
Posts: 4,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: TW: 2000 flameco black ITR..built turbod #1411 (mramerica05)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mramerica05 »</TD></TR><TR><TD CLASS="quote">how much for just the turbo, manifold, and intercooler?</TD></TR></TABLE>
im not parting this car out..
im not parting this car out..