IL 98 Track/Autox K24 EK9 Clone
04-28-2017, 05:02 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
98 Track/Autox K24 EK9 Clone
SOLD
Engine:
· 245whp/193ft-lb, tuned by Mikey @ ProFunction
· K24A2 DOHC iVTEC (2006 TSX)
· Custom Intake w/ 4-inch Filter + Velocity Stack and gold foil wrap
· H-R 70mm Throttle Body
· K-Tuned Throttle Position Sensor
· H-R Throttle Cables
· RBC Intake Manifold w/ 70mm Port Match
· Acura RDX 410cc Injectors
· H-R Fuel Rail, Braided -AN Lines, FPR, and In-Line Filter
· Yellow Powdercoated Valve Cover
· Innovative Billet Mounts, 90A Durometer with custom yellow bushings
· Denso Iridium Spark Plugs
· Civic Si Black Spark Plug Cover
· K20A2 50* VTC Gear Pinned to 45* by Hytech
· K20A2 Oil Pump, Chain, and Baffle
· H-R AC/PS Delete
· PLM R-Crew Replica Header
· ProFunction 3″ Custom SS Exhaust with Magnaflow mufflers
· H-R/Griffin Full Radiator Kit
· Hidden Coolant Overflow
· Brake Booster Brace
· Custom fluid/vented steering rack setup
Drivetrain:
· 2005 EP3 Civic Si 5-Speed Transmission
· mFactory Helical LSD
· Clutch Masters FX300 Clutch
· Clutch Masters Lightweight Flywheel
· H-R v3 Fully Adjustable Shifter
· H-R Shift Linkages and Bushings
· H-R Clutch Line Kit
· H-R Delrin Shift **** (White)
· Braided SS Fuel Line with -AN Fittings
· Duralast Gold Lifetime Axles (RSX-S)
ECU and Electronics:
· Hondata K-Pro V4
· K20A2 Engine Wiring Harness
· H-R Fuel Pressure Gauge
· H-R Grounding Kit
· H-R Conversion Harness
· OEM Radio Delete
· OEM Antenna Delete
Suspension/Chassis:
· Fortune Auto 500 Coilovers
· Swift Springs (9k/12k)
· Skunk2 Front Camber Kit
· Voodoo Billet Rear LCAs
· No Name Rear Camber Kit
· Civic Type R Rear Swaybar
· Integra Type R 26mm Front Swaybar
· DC Front Subframe
· Integra GSR Steering Rack
· Integra Type R Front Control Arms
· ASR Rear Subframe Brace
· H-R/Innovative EKK2 Engine Mounts
· Alignment Specs: -2.9F/-1.9R
Wheels & Brakes:
· 15×8 et38 Braid Fullrace Wheels (custom sizing)
· 225/45-15 Hankook Ventus Z214 Tires
· Muteki SR48 Open-Ended Lug Nuts (Black)
· 15×6 et50 EK9 Civic Type R Wheels
· 205/50-15 BFG Rival Tires (extreme wet/cold setup)
· 98-Spec ITR 5-Lug Hubs (F/R)
· 98-Spec ITR Disk Brakes (F/R)
· 98-Spec ITR Brake Booster
· 98-Spec ITR Brake Master Cylinder
· Centric Premium Rotors (F/R)
· Ferodo DS2500 Brake Pads (F/R)
Interior & Safety:
· Half Cage w/ Integrated Rear Strut Brace
· Crow Enterprizes Blackbird Kam Lock Harnesses (not included)
· Driven Performance 12.5″ Steering Wheel
· EK9 Recaro Front Seats
· Full EK9 Interior Bezels, Carpet, Trim, and Panels
· NRG Quick Release Hub and Lock
· Mugen Pedals
· Armrest Delete
· Trimmed and Fitted Rear EK9 Black Plastic Paneling
Exterior:
· Championship White Paint
· Full Authentic EK9 Type R Exterior (Spoiler, Lips, Hatch, Hood, Headlights…)
· Rear Spoiler Tilt Alex Brackets
· MY2000 Taillights
The Bad
- The heater core needs to be replaced, if you want heat. I have a new replacement, but just haven't gotten around to doing it. Currently the line is looped, bypassing the heater core and all is good in its current state. I have the tubing and the valve, as well.
- There are a couple of gashes on the undercarriage. No frame damage, but looks like the previous owner ran something over. They can easily be repaired by a shop if they bug you, but they're just cosmetic. They are not rusted.
- There is a slight mist of white overspray on the dash from when the cage was painted. But the dash could easily be plasti-dipped or painted black when removed to fix the heater core.
Please feel free to pm me with any questions if you are genuinely interested.
Engine:
· 245whp/193ft-lb, tuned by Mikey @ ProFunction
· K24A2 DOHC iVTEC (2006 TSX)
· Custom Intake w/ 4-inch Filter + Velocity Stack and gold foil wrap
· H-R 70mm Throttle Body
· K-Tuned Throttle Position Sensor
· H-R Throttle Cables
· RBC Intake Manifold w/ 70mm Port Match
· Acura RDX 410cc Injectors
· H-R Fuel Rail, Braided -AN Lines, FPR, and In-Line Filter
· Yellow Powdercoated Valve Cover
· Innovative Billet Mounts, 90A Durometer with custom yellow bushings
· Denso Iridium Spark Plugs
· Civic Si Black Spark Plug Cover
· K20A2 50* VTC Gear Pinned to 45* by Hytech
· K20A2 Oil Pump, Chain, and Baffle
· H-R AC/PS Delete
· PLM R-Crew Replica Header
· ProFunction 3″ Custom SS Exhaust with Magnaflow mufflers
· H-R/Griffin Full Radiator Kit
· Hidden Coolant Overflow
· Brake Booster Brace
· Custom fluid/vented steering rack setup
Drivetrain:
· 2005 EP3 Civic Si 5-Speed Transmission
· mFactory Helical LSD
· Clutch Masters FX300 Clutch
· Clutch Masters Lightweight Flywheel
· H-R v3 Fully Adjustable Shifter
· H-R Shift Linkages and Bushings
· H-R Clutch Line Kit
· H-R Delrin Shift **** (White)
· Braided SS Fuel Line with -AN Fittings
· Duralast Gold Lifetime Axles (RSX-S)
ECU and Electronics:
· Hondata K-Pro V4
· K20A2 Engine Wiring Harness
· H-R Fuel Pressure Gauge
· H-R Grounding Kit
· H-R Conversion Harness
· OEM Radio Delete
· OEM Antenna Delete
Suspension/Chassis:
· Fortune Auto 500 Coilovers
· Swift Springs (9k/12k)
· Skunk2 Front Camber Kit
· Voodoo Billet Rear LCAs
· No Name Rear Camber Kit
· Civic Type R Rear Swaybar
· Integra Type R 26mm Front Swaybar
· DC Front Subframe
· Integra GSR Steering Rack
· Integra Type R Front Control Arms
· ASR Rear Subframe Brace
· H-R/Innovative EKK2 Engine Mounts
· Alignment Specs: -2.9F/-1.9R
Wheels & Brakes:
· 15×8 et38 Braid Fullrace Wheels (custom sizing)
· 225/45-15 Hankook Ventus Z214 Tires
· Muteki SR48 Open-Ended Lug Nuts (Black)
· 15×6 et50 EK9 Civic Type R Wheels
· 205/50-15 BFG Rival Tires (extreme wet/cold setup)
· 98-Spec ITR 5-Lug Hubs (F/R)
· 98-Spec ITR Disk Brakes (F/R)
· 98-Spec ITR Brake Booster
· 98-Spec ITR Brake Master Cylinder
· Centric Premium Rotors (F/R)
· Ferodo DS2500 Brake Pads (F/R)
Interior & Safety:
· Half Cage w/ Integrated Rear Strut Brace
· Crow Enterprizes Blackbird Kam Lock Harnesses (not included)
· Driven Performance 12.5″ Steering Wheel
· EK9 Recaro Front Seats
· Full EK9 Interior Bezels, Carpet, Trim, and Panels
· NRG Quick Release Hub and Lock
· Mugen Pedals
· Armrest Delete
· Trimmed and Fitted Rear EK9 Black Plastic Paneling
Exterior:
· Championship White Paint
· Full Authentic EK9 Type R Exterior (Spoiler, Lips, Hatch, Hood, Headlights…)
· Rear Spoiler Tilt Alex Brackets
· MY2000 Taillights
The Bad
- The heater core needs to be replaced, if you want heat. I have a new replacement, but just haven't gotten around to doing it. Currently the line is looped, bypassing the heater core and all is good in its current state. I have the tubing and the valve, as well.
- There are a couple of gashes on the undercarriage. No frame damage, but looks like the previous owner ran something over. They can easily be repaired by a shop if they bug you, but they're just cosmetic. They are not rusted.
- There is a slight mist of white overspray on the dash from when the cage was painted. But the dash could easily be plasti-dipped or painted black when removed to fix the heater core.
Please feel free to pm me with any questions if you are genuinely interested.
Last edited by Battle Monkey; 10-23-2017 at 04:29 PM.
04-29-2017, 05:34 AM
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Bump'er up boys.
This car is a true head turner for enthusiasts of all kinds. Whether you plan to race it or just use it as a fun weekend toy, it'll more than do the job.
Lots of quality parts in this build, to ensure safe, reliable power.
This car is a true head turner for enthusiasts of all kinds. Whether you plan to race it or just use it as a fun weekend toy, it'll more than do the job.
Lots of quality parts in this build, to ensure safe, reliable power.
Re: 98 Track/Autox K24 EK9 Clone
Trending Topics
06-16-2017, 11:24 AM
#11
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Haha. To be fair the hatchback models didn't come with AC or PS from the factory.
Feel free to pm with any questions.
Feel free to pm with any questions.
07-19-2017, 05:40 AM
#14
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Get your Harley sold and bring the cash! I would be happy to make the deal happen.
i washed the car and cly barred any autocross scuffs off the paint this weekend. I also removed all the stickers and the wing risers.
i washed the car and cly barred any autocross scuffs off the paint this weekend. I also removed all the stickers and the wing risers.
07-25-2017, 08:06 PM
#20
07-25-2017, 08:14 PM
#21
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Best bet would be to call a Honda shop in NY and ask them what it would take to pass. They may be able to tell you exactly what is needed. I'm sure there are plenty of ghetto swapped hondas in horrible shape in NY that pass emissions without issue.
this car is very clean, has OBD2, no CELs, 2 mufflers (not loud for normal street driving, with a nice smooth tone), and has the stock 3 point seat belts all in place. Maybe the only thing they would hassle you on is steering wheel not having an airbag. But you could easily just toss in a stock DX steering wheel before bringing the car in for emissions. Takes maybe 10 minutes to do. I doubt they'd actually check to make sure the airbag is plugged in. Likely just a visual inspection. But I'm no expert on NY emissions law.
this car is very clean, has OBD2, no CELs, 2 mufflers (not loud for normal street driving, with a nice smooth tone), and has the stock 3 point seat belts all in place. Maybe the only thing they would hassle you on is steering wheel not having an airbag. But you could easily just toss in a stock DX steering wheel before bringing the car in for emissions. Takes maybe 10 minutes to do. I doubt they'd actually check to make sure the airbag is plugged in. Likely just a visual inspection. But I'm no expert on NY emissions law.
07-25-2017, 08:17 PM
#22
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Also, looks like I forgot to post this.
my Fastest clean run of the day from Sunday. Good enough for 3rd fastest raw time out of about 40 cars. My fastest run overall was about .7s quicker but I hit 2 cones.
Very capable car.
https://youtu.be/QVCbAABZTio
my Fastest clean run of the day from Sunday. Good enough for 3rd fastest raw time out of about 40 cars. My fastest run overall was about .7s quicker but I hit 2 cones.
Very capable car.
https://youtu.be/QVCbAABZTio
08-15-2017, 01:39 PM
#23
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Autocrosses the civic this past weekend. 5th overall raw. 15th in index.
Lots of interest but nobody to pull the trigger yet.
https://youtu.be/y-VwesXR7d0
Lots of interest but nobody to pull the trigger yet.
https://youtu.be/y-VwesXR7d0
08-29-2017, 03:26 PM
#25
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: USA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Re: 98 Track/Autox K24 EK9 Clone
Bump. Just gonna cut to the chase.
My bottom price is $10k FIRM. If you want the car, and have $10k cash, car can be yours.
My bottom price is $10k FIRM. If you want the car, and have $10k cash, car can be yours.