CA 1998 Civic Coupe (ek)
#1
1998 Civic Coupe (ek)
1998 Honda civic Dx for sale.
*******WILL NOT PART OUT******
if you ask you will be ignored....
*******If this post is still up, the car is still for sale. Please do not ask or you will be ignored******
This car has no problems what so ever, A lot of this car is rebuilt BY ME & I HAVE EVERY RECEIPT for every single part I replaced..
D16y7
--All new parts.-- 0miles
-Fully rebuilt head
-timing belt & pulleys
-IACV
-Fuel pump
-fuel filter
-head gasket
-water pump
-starter
-I completely cleaned out intake manifold of gunk & nasty crap. HOT TANKED
- EVERY fuse, Dash Light, HVAC light
-Csf radiator
-OEM JDM EK4 Radiator support
-oil filter
-spark plugs,
-Wires
-Distributor
-cam seal & crank seal
- DEVsport P/S reroute braided line
-speed factory shifter spring
-DNA Motorsports Slip on Header
-O2 sensors (front & Rear)
-Thermostat
-Oil pressure switch
-intake manifold gasket & TB gasket
-crank sensor
-Head Bolts
-Coolant temp sensor
-Injector O-Rings & injectors were cleaned out also
-ignition switch
-valve cover gasket
-Function Form type 1 (0miles)
-Buddy club P1 extended ball joints (0miles)
-Skunk2 Pro series Plus Front Camber Kit (0miles)
-Function 7 Lower control arms 0miles)
- Energy suspension Bushings (Front & Rear) (0miles)
-inner & outer tie rods (0miles)
-New front Hubs & Wheel bearings
(Not installed yet)
-Valves Adjusted
-Pistons Cleaned & Checked
-Oil Pan Gasket
-Bearings checked for clearance
**NO OIL LEAKS or OVERHEATING AT ALL**
I'm probably forgetting some other parts..
---CONS---
Interior is spotless, just needs a good cleaning. No rips or tears
Car is not in my name but I have pink and bill of sale. I will also make one for you.
Core support has to be either bolted on or welded on. But is holding perfectly by Bumper support Holes.
Hood needs to be re-aligned.
Rear bumper has slight crack.
No A/C or P/S
Evap Canister Delete. Not bad or anything but the sensor was done for.
Heater core has been unistalled & thrown away due to me this a dedicated track car.
“CAR WILL NEED TO BE TOWED DUE TO REMOVING THE INTERIOR AND ENGINE HARNESS”
asking $600.00
Location: Palmdale, CA
818-915-7713
-Ben
**if car is not sold by next saturday (5-5-2017) it will go to scrap yard and all parts will be removed and scolded individually***
*******WILL NOT PART OUT******
if you ask you will be ignored....
*******If this post is still up, the car is still for sale. Please do not ask or you will be ignored******
This car has no problems what so ever, A lot of this car is rebuilt BY ME & I HAVE EVERY RECEIPT for every single part I replaced..
D16y7
--All new parts.-- 0miles
-Fully rebuilt head
-timing belt & pulleys
-IACV
-Fuel pump
-fuel filter
-head gasket
-water pump
-starter
-I completely cleaned out intake manifold of gunk & nasty crap. HOT TANKED
- EVERY fuse, Dash Light, HVAC light
-Csf radiator
-OEM JDM EK4 Radiator support
-oil filter
-spark plugs,
-Wires
-Distributor
-cam seal & crank seal
- DEVsport P/S reroute braided line
-speed factory shifter spring
-DNA Motorsports Slip on Header
-O2 sensors (front & Rear)
-Thermostat
-Oil pressure switch
-intake manifold gasket & TB gasket
-crank sensor
-Head Bolts
-Coolant temp sensor
-Injector O-Rings & injectors were cleaned out also
-ignition switch
-valve cover gasket
-Function Form type 1 (0miles)
-Buddy club P1 extended ball joints (0miles)
-Skunk2 Pro series Plus Front Camber Kit (0miles)
-Function 7 Lower control arms 0miles)
- Energy suspension Bushings (Front & Rear) (0miles)
-inner & outer tie rods (0miles)
-New front Hubs & Wheel bearings
(Not installed yet)
-Valves Adjusted
-Pistons Cleaned & Checked
-Oil Pan Gasket
-Bearings checked for clearance
**NO OIL LEAKS or OVERHEATING AT ALL**
I'm probably forgetting some other parts..
---CONS---
Interior is spotless, just needs a good cleaning. No rips or tears
Car is not in my name but I have pink and bill of sale. I will also make one for you.
Core support has to be either bolted on or welded on. But is holding perfectly by Bumper support Holes.
Hood needs to be re-aligned.
Rear bumper has slight crack.
No A/C or P/S
Evap Canister Delete. Not bad or anything but the sensor was done for.
Heater core has been unistalled & thrown away due to me this a dedicated track car.
“CAR WILL NEED TO BE TOWED DUE TO REMOVING THE INTERIOR AND ENGINE HARNESS”
asking $600.00
Location: Palmdale, CA
818-915-7713
-Ben
**if car is not sold by next saturday (5-5-2017) it will go to scrap yard and all parts will be removed and scolded individually***
Last edited by BATmoREX; 04-28-2018 at 07:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Beja
Honda Civic / Del Sol (1992 - 2000)
11
12-21-2017 10:50 AM
k90n90w
Honda Civic / Del Sol (1992 - 2000)
15
08-29-2014 10:21 AM
rasta420
Honda CRX / EF Civic (1988 - 1991)
4
05-15-2003 07:05 AM