KY 1992 Accord F20B swapped
01-18-2012, 04:00 AM
#1
Thread Starter
Join Date: Aug 2005
Location: Louisville, Ky, USA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
1992 Accord F20B swapped
1992 Honda Accord EX Coupe 5spd- Black in color
VIN - 1HGCB7179NA044268
209,000 miles on chassis, about 42,000 on engine. Might go up because my buddy may drive it for advertising purposes
Power windows
Power Locks
Power Mirrors
Power Sunroof
Cruise Control
No A/C
No Power steering
***NO RUSTY QUARTER PANELS**** (professionally installed and painted, back of the doors back and the roof all painted at the time)
Engine:
-JDM F20b purchased from Hmotors and installed with new timing belt and water pump the week before IA 2011
-Skunk2 Pro series intake manifold
-No name short ram intake and filter
-No name header
-Vibrant Stainless Steal Catback exhaust, sounds great not raspy at all
-Tuned on a chipped p28 with chrome, car pulls very strong
-Brand new clutch, less than 10 miles
-Brand new drivers side axle
Suspension:
-Koni Yellow struts with Neuspeed sport springs, rides very comfortable
-Ingalls Adjustable upper ball joints in the front
-Megan racing adjustable upper control arms in the rear
-Function and Form lower control arms in the rear
-Full polyurethane bushing kit (brand new, not installed)
-Progress rear sway bar (brand new, not installed)
-5-Lug swapped using all BB6 Prelude parts (front knuckles swapped over with the lower control arm reamed out to fit the ball joint, new rear hub/bearing assembly, new front ball joints, new axles, new tie rod ends, new pads, new rotors. http://www.cb7tuner.com/vbb/showthre...hlight=prelude
-Brand new prelude tie-rod ends
-16" Prelude Blades with 205/50/16 Falken Ziex's with about 10,000 miles on them. Plenty of tread left.
-Alignment done on 12/13/2011 after tie-rod install
-Russel Stainless steal braided brake lines
-No Abs
Exterior:
-Black in color
-No rust
-JDM 1-piece head lights, legit not the ebay ****
-6000K HID's
-All OEM bumpers
-No window tint
-Hood Dampers installed, no hood prop.
Interior:
-Tan Clothe interior
-Short shift adapter
Stereo:
No cd player but speakers stay in car
Extras/Good stuff:
-Will include any and all parts i have laying around for the car
-Brand new alternator installed a month ago
-Brand new Duralast Gold battery installed a month ago
-New Duralast clutch slave cylinder
The bad:
-No Air conditioning, this never bothered me as the windows down was fine
-Drivers side window sometimes comes off track but is a quick 5 minute fix for anyone
-Cut in front bumper from a muffler tip that was hit a few years ago
$3600 OBO NO TRADES!!!!, reasonable offers will be considered. I know that price seems high but this vehicle has been well taken care of and no corners were cut so please keep any comments to yourself.
PM on here
Call/text 502.299.2005
Pics, these are what i currently have on my computer. The first clear day i have there will be new pics of the car, along with my new car, posted up.
VIN - 1HGCB7179NA044268
209,000 miles on chassis, about 42,000 on engine. Might go up because my buddy may drive it for advertising purposes
Power windows
Power Locks
Power Mirrors
Power Sunroof
Cruise Control
No A/C
No Power steering
***NO RUSTY QUARTER PANELS**** (professionally installed and painted, back of the doors back and the roof all painted at the time)
Engine:
-JDM F20b purchased from Hmotors and installed with new timing belt and water pump the week before IA 2011
-Skunk2 Pro series intake manifold
-No name short ram intake and filter
-No name header
-Vibrant Stainless Steal Catback exhaust, sounds great not raspy at all
-Tuned on a chipped p28 with chrome, car pulls very strong
-Brand new clutch, less than 10 miles
-Brand new drivers side axle
Suspension:
-Koni Yellow struts with Neuspeed sport springs, rides very comfortable
-Ingalls Adjustable upper ball joints in the front
-Megan racing adjustable upper control arms in the rear
-Function and Form lower control arms in the rear
-Full polyurethane bushing kit (brand new, not installed)
-Progress rear sway bar (brand new, not installed)
-5-Lug swapped using all BB6 Prelude parts (front knuckles swapped over with the lower control arm reamed out to fit the ball joint, new rear hub/bearing assembly, new front ball joints, new axles, new tie rod ends, new pads, new rotors. http://www.cb7tuner.com/vbb/showthre...hlight=prelude
-Brand new prelude tie-rod ends
-16" Prelude Blades with 205/50/16 Falken Ziex's with about 10,000 miles on them. Plenty of tread left.
-Alignment done on 12/13/2011 after tie-rod install
-Russel Stainless steal braided brake lines
-No Abs
Exterior:
-Black in color
-No rust
-JDM 1-piece head lights, legit not the ebay ****
-6000K HID's
-All OEM bumpers
-No window tint
-Hood Dampers installed, no hood prop.
Interior:
-Tan Clothe interior
-Short shift adapter
Stereo:
No cd player but speakers stay in car
Extras/Good stuff:
-Will include any and all parts i have laying around for the car
-Brand new alternator installed a month ago
-Brand new Duralast Gold battery installed a month ago
-New Duralast clutch slave cylinder
The bad:
-No Air conditioning, this never bothered me as the windows down was fine
-Drivers side window sometimes comes off track but is a quick 5 minute fix for anyone
-Cut in front bumper from a muffler tip that was hit a few years ago
$3600 OBO NO TRADES!!!!, reasonable offers will be considered. I know that price seems high but this vehicle has been well taken care of and no corners were cut so please keep any comments to yourself.
PM on here
Call/text 502.299.2005
Pics, these are what i currently have on my computer. The first clear day i have there will be new pics of the car, along with my new car, posted up.
Last edited by mcdizzle; 01-22-2012 at 11:22 PM.
01-20-2012, 03:27 AM
#5
Thread Starter
Join Date: Aug 2005
Location: Louisville, Ky, USA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 Accord F20B swapped
I loved it for the short period of time that I actually drove it with the f20b installed. I took an h22a that had over 100k on it and replaced it with a fresh swap from hmo. Started up on first crank and still runs like a scalded dog today. I just decided it was time for me to step into a new class of vehicles and upgraded to a g35, selling this to help pay off my loan.
Trending Topics
02-01-2012, 01:34 PM
#16
Thread Starter
Join Date: Aug 2005
Location: Louisville, Ky, USA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
08-29-2012, 04:36 PM
#19
Trial User
Join Date: Aug 2012
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 Accord F20B swapped
alright serious question i got a 92 accord with a f22b and wanna swap it with a f20 vtec what all do i have to do to complete the swap like can i use the same mounts or what mount would i need and what else would i need to complete the swap i now i can use my same trany
Thread
Thread Starter
Forum
Replies
Last Post
