NY ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
10-06-2011, 02:30 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
As the season is coming to an end, I am getting ready to let go of my SIR. I have owned the car for approximately 3 and a half years. This car is/was where all my money went. I have taken care of it very well, all oil changes have been done with synthetic oil roughly every 2,500 miles. The car has about 90,000 miles on it. The motor and trans are original not swapped. As the title states the car is registered in New York under the Japanese 10-digit vin. I have registered it myself 3 times since I have owned it(due to taking it off the road for winter). Still to this day I have not seen another EG6 legitimately registered in New York, so it is pretty much one of a kind as far as I know. It is going to be a very sad day when the car is gone. Lots of blood, sweat, and tears went into getting this thing to where it is today!
Motor/Bay:
-Stock(The lost motion assembly ticks a little bit. Does not harm anything. Also does not happen all the time, they are $180 from inline four.)
-Smsp Replica Header
-Custom Intake
-Fully Shaved/Shock towers are extended
-Harness fully tucked by (SHG_EasyE)
-New brake master cylinder
-Hasport polished motor mounts
-Stock semi-polished fuel rail
-Apexi World Sport Exhaust
-Adjustable test pipe
Exterior
-Paint is Original except for the driver side fender, and hood
-BRAND NEW Carbon/Kevlar Backyard Special wing
-BRAND NEW Oem front lip
-The windshield is not bronze anymore due to my hood flying up and cracking it. It was just replaced for the second time 2 weeks ago.(A new Rdot hood was put on also).
-Rest of the windows are bronze and the rear glass has the parking sticker still on it.
-No rust on quater panels.(They are tucked and pulled slightly).
If I forgot anything feel free to pm and ask.
Interior
-Stock tan EG6 interior
-Momo Monte Carlo steering wheel
-Momo steering wheel hub
-Spoon Sports shift ****
Wheels/Tires (Have roughly 1500 miles on it if that.)
-BRAND NEW Work Equip 03's 15x9 5mm spacer in the front, 20mm spacer in the rear, 0 offset, and 4in lips all around.
-Toyo Proxy T1r's 195/45r15 all around.
Suspension (Have roughly 1500 miles on it if that.)
-Buddy Club N+ ITR Spec
-Function 7 control arms
-Skunk 2 camber kits all around
If I forgot anything feel free to pm me and ask, or text at (845)380-2427. I am not going to put a price at this point, feel free to throw offers.I am not looking to part the car out, but i will take the wing,wheels, and suspension off if necessary to lower the cost.
Prices
For car as seen in pictures-$11,000 OBO!
Car w/Stock suspension, stock wheels, and knockoff spoon wing-$8,000 OBO!
If you would like it with just wheels, just wing or just suspension. We can talk a price.
NO LOW BALLERS or FLAKERS PLEASE. It is a very reliable car even being as low as it is. I will also except trades for an S2000 even if I have to throw a little cash on my end.
Also feel free to check out the whole build. https://honda-tech.com/forums/appearance-build-threads-122/omgwtfbbq-bennys-rhd-eg6-buildski-2674653/
(In these pictures the 20mm spacers aren't on in the rear)
Motor/Bay:
-Stock(The lost motion assembly ticks a little bit. Does not harm anything. Also does not happen all the time, they are $180 from inline four.)
-Smsp Replica Header
-Custom Intake
-Fully Shaved/Shock towers are extended
-Harness fully tucked by (SHG_EasyE)
-New brake master cylinder
-Hasport polished motor mounts
-Stock semi-polished fuel rail
-Apexi World Sport Exhaust
-Adjustable test pipe
Exterior
-Paint is Original except for the driver side fender, and hood
-BRAND NEW Carbon/Kevlar Backyard Special wing
-BRAND NEW Oem front lip
-The windshield is not bronze anymore due to my hood flying up and cracking it. It was just replaced for the second time 2 weeks ago.(A new Rdot hood was put on also).
-Rest of the windows are bronze and the rear glass has the parking sticker still on it.
-No rust on quater panels.(They are tucked and pulled slightly).
If I forgot anything feel free to pm and ask.
Interior
-Stock tan EG6 interior
-Momo Monte Carlo steering wheel
-Momo steering wheel hub
-Spoon Sports shift ****
Wheels/Tires (Have roughly 1500 miles on it if that.)
-BRAND NEW Work Equip 03's 15x9 5mm spacer in the front, 20mm spacer in the rear, 0 offset, and 4in lips all around.
-Toyo Proxy T1r's 195/45r15 all around.
Suspension (Have roughly 1500 miles on it if that.)
-Buddy Club N+ ITR Spec
-Function 7 control arms
-Skunk 2 camber kits all around
If I forgot anything feel free to pm me and ask, or text at (845)380-2427. I am not going to put a price at this point, feel free to throw offers.I am not looking to part the car out, but i will take the wing,wheels, and suspension off if necessary to lower the cost.
Prices
For car as seen in pictures-$11,000 OBO!
Car w/Stock suspension, stock wheels, and knockoff spoon wing-$8,000 OBO!
If you would like it with just wheels, just wing or just suspension. We can talk a price.
NO LOW BALLERS or FLAKERS PLEASE. It is a very reliable car even being as low as it is. I will also except trades for an S2000 even if I have to throw a little cash on my end.
Also feel free to check out the whole build. https://honda-tech.com/forums/appearance-build-threads-122/omgwtfbbq-bennys-rhd-eg6-buildski-2674653/
(In these pictures the 20mm spacers aren't on in the rear)
Last edited by Benny_Ej6; 10-09-2011 at 04:01 PM.
10-06-2011, 02:47 PM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
Thanks man...A lot of people were hesitant about the color when i told them or they saw pics but when they see it in person they love it.
10-06-2011, 03:23 PM
#5
Honda-Tech Member
Join Date: Sep 2008
Location: Miami, fl, usa
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
car looks great. looks like a bit too much pull for the wheels but clean none the less. GLWS.
10-06-2011, 03:24 PM
#6
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
10-06-2011, 03:47 PM
#8
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
10-06-2011, 07:26 PM
#10
Honda-Tech Member
Join Date: Jun 2009
Location: pittsburgh
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
My eyes hurt from not blinking sir, absolutely gorgeous! GLWS!! can tell you devoted every gram of energy & your style is impecable man. Your luccky i don't come buy this 
10-06-2011, 11:09 PM
#13
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
10-07-2011, 03:00 AM
#15
Honda-Tech Member
Join Date: Oct 2011
Location: DUBLIN ,IRELAND
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
sweet motor man ,say you'll be sad to see her go alrite.
good luck with the sale not that you'll need much with a motor like that
good luck with the sale not that you'll need much with a motor like that
10-08-2011, 04:45 PM
#17
Honda-Tech Member
Join Date: Jan 2007
Location: White Plains, NY, USA
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
this will be a sad day
this car is awesome and who ever buys it will be very happy with it! bump for u benski!
this car is awesome and who ever buys it will be very happy with it! bump for u benski!
10-09-2011, 03:19 PM
#19
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
10-09-2011, 04:02 PM
#20
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
PRICES ADDED. THEY ARE NEGOTIABLE! So if you are going to be pming or posting hating on the price or whatever it may be please keep to yourself.
10-10-2011, 12:56 PM
#22
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Skiin New York
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
10-11-2011, 03:48 PM
#24
Honda-Tech Member
iTrader: (4)
Join Date: Nov 2006
Location: bristol, ct, usa
Posts: 2,195
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***1992 Honda Civic EG6 SIR** STANCED/SHAVED/TUCKED (Legitimately Registered)
looks nice did you modd the strut towers they look taller or the bump dont look right love the colors
