Transmission boss
#2
Honda-Tech Member
Re: Transmission boss
Usually a boss is a machined recess in something, like the injector boss, which is the recess in the intake manifold that the injector sits in. Maybe they're talking about the spots where the trans bearings sit?
#3
Honda-Tech Member
Re: Transmission boss
The cylinder shape thread extension to bolt things too.
...spent a whole 30sec trying to find a pic, but gave up. Hopefully that is enough.
And on trans there are actually some blank spots good for prying.
...spent a whole 30sec trying to find a pic, but gave up. Hopefully that is enough.
And on trans there are actually some blank spots good for prying.
#5
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: Good ol' SGV
Posts: 1,046
Likes: 0
Received 0 Likes
on
0 Posts
Re: Transmission boss
Oh, okay. Makes sense now. Needed to know because Hasport told me I would need to drill into these spots for the EGJ1 mounts for my CL-S tranny
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2005
Location: Good ol' SGV
Posts: 1,046
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Trunks31415
Transmission & Drivetrain
6
12-06-2015 11:46 AM