dc_jdm_dreams

Okay so its time for a new clutch in my stock 99 dc4. So i have been thinking might as well go for an upgrade because I am tired of my cousin making me look stupid on pulles in his low compression b20 swapped dc4 and i am sure a new lighter flywheel and better clutch will help me with my problems. I was wondering if anyone has experience and could tell me from that, what the best clutch and fly wheel combo is. I am working with a tight budget around 600 for all parts. I have had some in mind so far like the stage two competition clutch part number CK-8026-2 which i have heard good reviews about. To many horror stories about my other options like xtd stage3, xtr stage3 and f1 stage3. I have also been told that me getting a stage3 clutch would be stupid for my application. You guys have never steered me wrong so far with my teggy so any input on this matter will greatly be appreciated.

dc_jdm_dreams

Really people over a hundred views and no replies. WTF come on peeps

bryan24207

looks like ur screwed into keeping stock clutch since no one will help haha

Dc4LsTeG

iTrader: (7)

^nice help..I've used a xtd stage 3 with 8 pound flywheel and I liked it a lot for the price

bryan24207

cant give him help on something i dont know about..im new to hondas crossing over from the evo world

Dc4LsTeG

iTrader: (7)

Then don't post..I know your trying to get your post count up cuz your a noob but you dont need to be posting everywhere when you don't know

94EG8

Exedy OEM replacement clutch or Exedy stage 1 clutch on ebay. Exedy is Honda's main OEM supplier for clutches, buy on ebay and it's less than a third of what you would pay at the dealer. There is absolutely no point in putting in an aggressive puck clutch in a stock car, all that's going to happen is a lot of shock loading on the diff and the car will be a pain to drive in traffic.

bryan24207

umm actually your wrong, he's a guy down here on ft. bliss with me so i was just bumping his post up so he can get the help he needs..so get the ***** off my back

dc_jdm_dreams

I have decided to go with the competition clutch stage 2 full setup including there flywheel, pressure plate, Kevlar clutch plate and all the little goodies to change it out. sorry for not updating the thread but i already got the clutch.

90blkteg

iTrader: (2)

I agree with the above statement but the first time I drove my car with my ACT setup with a 4 puck I was hooked! I have also had the XTD setup but that was only beacause it came with my car. I have also driven a car with a brand new XTD setup & it sucked to me because it didn't grab near as well as my ACT setup & my setup is in need for a changing but still grabs a hell of a lot better than XTD.

Jaynik

That is good to know, I think I might take this advice myself with regard to my current transmission rebuild.

dc_jdm_dreams

Never got to install the competiton stage 2 clutch. But I have driven one since my last post. I deff a hard clutch. Seems to be a little too hard from a stage two. I am kswapping my integra now and I decided to go with an Exedy stage 2 clutch kit and a Comp clutch lightweight flywheel. I have driven the set up before and I like it alot. I am also a fan of the clutch masters fx 300. My buddy has it in his TSX

lzylst

iTrader: (1)

I believe the CC stage2 can be ordered with two different pressure plates. I know my CC stg2 feels like stock pedal pressure. My CC stg4 pedal pressure felt like stock also.

dc_jdm_dreams

Yes the cc can be ordered with to pressure plate the 2100 and the 2700 i believe. I have a exedy stage 2 three puck sprung setup now though.

DeeC2

I think that clutch you are currently using is horrid compared to the CC

Nik_EP3

i am using Xtreme Street ACT AR1-XTSS clutch on my K24, i think its best decision for street/race use on K engine.

DeeC2

currently i have a ACT 6puck unsprung its out of life but its from 2007 and has taken plenty of abuse and was amazing i have no complaints with them

It is now time for a replacement and my local shop advised me to go with CC i got the whole kit flywheel and all... cant wait it will be here tomorrow.

My buddy already has one in his DC with a oem flywheel but that thing grabs nice

dc_jdm_dreams

Bump

dc_jdm_dreams

I have decided to replace my OEM clutch on my DD 2006 type S due to the throw out bearing making noise when cold. I went with the Comp Clutch stage1. Keep on a lookout hopefully will be doing a write up this soon.