Auto to Manual swap help.
03-29-2014, 01:12 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
Auto to Manual swap help.
Ok I got a 01 integra that is automatic, I got a whole 95 integra that is manual and using it as a loner car. Now my question is, can I used either the auto or manual mount to make it fit. I know the chassis bracket is set differently from auto to manual and I also know that the bolt patterns on auto and manual mounts are different as well. I was wondering if anyone has ever fabricated the two mount to make it work? I also know I can buy the auto to manual conversion mount, but I'd like to fab my own mount. Any help or pointers would be great so I can fab my own mount 😏. Thanks in advance!
04-01-2014, 04:44 PM
#3
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: Auto to Manual swap help.
drill the spot welds out of the bracket welded to the passenger's side frame rail on both cars, weld the manual version on your car.
Thread
Thread Starter
Forum
Replies
Last Post
EFbattleSedan
Honda Accord (1990 - 2002)
1
06-30-2013 06:07 AM
longhairbro17
Honda CRX / EF Civic (1988 - 1991)
2
07-03-2011 04:37 PM
idriveadelsol7
Honda Civic / Del Sol (1992 - 2000)
1
07-20-2005 09:13 AM