Auto to Manual swap help!
08-04-2011, 09:03 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Yokosuka, Japan
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Auto to Manual swap help!
Hey everyone, need some help!
Purchased a DC that had a auto to manual swap already completed. Pulled the engine (to build) and started a tuck at the same time. No wires were cut or shortened, just rerouted. Now, when I put the key in, I can't get it out. I tried jumpering the two thick black wires on the auto gear shift harness with no luck. Key comes out fine when battery is disconnected. Anyone have any ideas? Thanks!!
Purchased a DC that had a auto to manual swap already completed. Pulled the engine (to build) and started a tuck at the same time. No wires were cut or shortened, just rerouted. Now, when I put the key in, I can't get it out. I tried jumpering the two thick black wires on the auto gear shift harness with no luck. Key comes out fine when battery is disconnected. Anyone have any ideas? Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
srt4pilot
Honda CRX / EF Civic (1988 - 1991)
1
05-28-2009 03:02 AM
ericjackson
Honda Accord (1990 - 2002)
2
06-21-2005 01:52 PM
