ATF feed pipe direction- Which book is right?
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2011
Location: Johns Creek, Ga
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
ATF feed pipe direction- Which book is right?
I'm working on a 04 CRV 4 speed A/T 4WD.
The ATF feed pipe has a flange on it.
Alldata shows this facing up.
The Honda schematic shows it facing down.
Who is right?
Also is this flange for an o-ring, or not.
I didn't see it when I was taking it apart.
P.S. Does anyone know of a good rebuild manual for this trans?
Thanks,
-Robert
The ATF feed pipe has a flange on it.
Alldata shows this facing up.
The Honda schematic shows it facing down.
Who is right?
Also is this flange for an o-ring, or not.
I didn't see it when I was taking it apart.
P.S. Does anyone know of a good rebuild manual for this trans?
Thanks,
-Robert
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2011
Location: Johns Creek, Ga
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
9civic8
Welding / Fabrication
10
10-15-2005 06:51 PM