7th Gen Accord Apexi WS2 Dual Axle Back
#1
Honda-Tech Member
Thread Starter
7th Gen Accord Apexi WS2 Dual Axle Back
Selling my Apexi WS2 dual cat back(was, now just axle-back) exhaust. =left
=left
The model is spefically for 7th gen 2003-2007 Honda Accord V6. I however LEFT MID PIPE ON THE ORIGINAL CAR AS BOLTS WERE SEIZED. I was able to use these on my 8th gen (2008-2012) Honda Accord sedan with a custom mid pipe as well.=left
=left
The model is spefically for 7th gen 2003-2007 Honda Accord V6. I however LEFT MID PIPE ON THE ORIGINAL CAR AS BOLTS WERE SEIZED. I was able to use these on my 8th gen (2008-2012) Honda Accord sedan with a custom mid pipe as well.=left
Last edited by thatboyrob; 01-08-2019 at 09:02 AM. Reason: missing info
#2
Honda-Tech Member
Thread Starter
Re: 7th Gen Accord Apexi WS2 Dual Axle Back
Selling my Apexi WS2 dual cat back(was, now just axle-back) exhaust. =left
=left
The model is spefically for 7th gen 2003-2007 Honda Accord V6. I however LEFT MID PIPE ON THE ORIGINAL CAR AS BOLTS WERE SEIZED. I was able to use these on my 8th gen (2008-2012) Honda Accord sedan with a custom mid pipe as well.=left
=left
No cuts or welds have been made to the factory canisters. Very little blemishes, dents or scrapes (car wasn't too low) They have sat in my garage for close to 3 years so figured it's time for someone else to utilize them.=left
=left
Could also be used for your own custom exhaust, just change the hangars and connecting pipe.=left
=left
Weld on Muffler runs around 100 each, so ASKING $200 for the dual set. (Setup Brand New was 950+ )=left
=left
Any questions please feel free to ask
=left
The model is spefically for 7th gen 2003-2007 Honda Accord V6. I however LEFT MID PIPE ON THE ORIGINAL CAR AS BOLTS WERE SEIZED. I was able to use these on my 8th gen (2008-2012) Honda Accord sedan with a custom mid pipe as well.=left
=left
No cuts or welds have been made to the factory canisters. Very little blemishes, dents or scrapes (car wasn't too low) They have sat in my garage for close to 3 years so figured it's time for someone else to utilize them.=left
=left
Could also be used for your own custom exhaust, just change the hangars and connecting pipe.=left
=left
Weld on Muffler runs around 100 each, so ASKING $200 for the dual set. (Setup Brand New was 950+ )=left
=left
Any questions please feel free to ask
Thread
Thread Starter
Forum
Replies
Last Post
Evildragonr
Honda Accord (1990 - 2002)
2
05-13-2007 09:07 PM
hondasport0023
Hybrid / Engine Swaps
2
01-12-2005 05:46 AM