Troubleshooting: Cold Start / Cranking issue: Turbo B16 Engine
Cold start cranks for ever and slowly catches and dies two to three times before ot stays running. You can hear it misfiring but within a few seconds it runs fine besides when i hit around 6k rpm it back fires and wont accel past 6k 6500. This is a turbo b16 . once it isstarted once that day it will start fine all day. It is tuned on chrome. Im starting to point towards ect sensors. The one wire sensor is unplugged and has aftermarket gauge connected to it. Any suggestions. Sorry if i posted in the wrong page. Any help is appreciated.
|
re: Troubleshooting: Cold Start / Cranking issue: Turbo B16 Engine
I belive if the one wire ect sensor is not hooked up it will not allow vtec? Could this be part of the issue
|
re: Troubleshooting: Cold Start / Cranking issue: Turbo B16 Engine
What fuel are you using? What injectors? Who created the tune? Was it on a dyno or is this a basemap tune? Do you have a wideband AFR gauge? What spark plugs?
Info info info. |
re: Troubleshooting: Cold Start / Cranking issue: Turbo B16 Engine
Originally Posted by 2x0
(Post 51556809)
What fuel are you using? What injectors? Who created the tune? Was it on a dyno or is this a basemap tune? Do you have a wideband AFR gauge? What spark plugs?
Info info info. |
Re: Troubleshooting: Cold Start / Cranking issue: Turbo B16 Engine
Originally Posted by 2x0
(Post 51556809)
What fuel are you using? What injectors? Who created the tune? Was it on a dyno or is this a basemap tune? Do you have a wideband AFR gauge? What spark plugs?
Info info info. |
All times are GMT -8. The time now is 09:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands