Skunk2 Intake Manifold - Stripped stud hole and unknown vacuum hose
03-27-2004, 07:02 PM
#1
Sushi Buffet Champion
Thread Starter
Join Date: Nov 2001
Location: Orange County, CA, US
Posts: 5,968
Likes: 0
Received 0 Likes
on
0 Posts
Skunk2 Intake Manifold - Stripped stud hole and unknown vacuum hose
Hey guys, I have a Skunk2 Intake Manifold and recently found out that I have a stripped thread in one of the holes where it bolts up to the throttle body. What can I do?
There's also an unknown vacuum hole in back of the manifold about 1/8". The front is where you plug in the hose from the FPR, but where does the one in the back plug to? I recenly notice this due to rough idling.
Please help, thanks.
There's also an unknown vacuum hole in back of the manifold about 1/8". The front is where you plug in the hose from the FPR, but where does the one in the back plug to? I recenly notice this due to rough idling.
Please help, thanks.
03-28-2004, 04:04 AM
#2
New User
Join Date: Mar 2001
Location: Wayland, MI, US
Posts: 2,462
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Intake Manifold - Stripped stud hole and unknown vacuum hose (GapxGuy)
Well can't you just run a tap in the stripped threads to clean them up?
That IM must have the worst documentation in the world. I've forgotten how I ended up hooking mine up, but it seems like the nipple in back ended up being connected to the FPR and the one from the front of the plenum I put a T on, but they both go straight to the plenum anyway right?
That IM must have the worst documentation in the world. I've forgotten how I ended up hooking mine up, but it seems like the nipple in back ended up being connected to the FPR and the one from the front of the plenum I put a T on, but they both go straight to the plenum anyway right?
Thread
Thread Starter
Forum
Replies
Last Post
jkalex05
Honda Civic / Del Sol (1992 - 2000)
1
08-23-2009 06:01 PM
obd2gsr
Tech / Misc
17
10-23-2003 10:19 AM
