KS Code 23. (Searched)
 

Hey guys, I just got finished with my swap, and just after driving it around getting into it, everything is fine. But, I hit the revlimiter in first and the CEL came on. I got it back home and it's the KS. I've searched all over these boards, but can't find anyone with my situation. I mean the second it hit the rev limiter it came on. Is this due to bad timing, faulty KS or KS wiring?

Please help

Ok, an update: I had my friend come over and he's looking at this with me. We've got the CEL to clear but it keeps coming on. The timing seems to be alright, but here is the weird part. My friend doesn't seem to think i'm hitting VTEC. It's revving all the way up no problem, and it will for about 45 seconds or so but he says he doesn't hear it. I don't know personally because this is my first VTEC car. After about 45 seconds of driving the CEL comes on and it goes into limp mode. If I shut the car off, then restart it, the CEL goes off and it's out of limp mode, but still no VTEC. Once we get back to my place, it's always pulling Code 23, Knock Sensor. =/

Please if anyone has a clue, fill me in!

Re: KS Code 23. (beoy9)
 

What motor/ecu combo ?
Get another knock sensor for $40-60 or simply have your ecu chipped to remove the knock sensor.

most like it's the sensor. they always go bad for a new swap