Interesting no start issue for carbureted car
#1
Honda-Tech Member
Thread Starter
Interesting no start issue for carbureted car
Have a carbureted truck that cranks over, but won't start. A rocker arm snapped, and dropped a valve in cylinder 4, replaced the valve, rocker arm, etc, and put back together. Timing is correct, checked 3 times by 2 different people. Distributor points to cyl 1 spark when at tdc.
The truck has fuel going to the intake and head (plugs smell and look moist from fuel), spark at each of the 4 plugs, and compression reads 125 on all 4 cylinders.
Can't figure out why it won't start. Looking for help or suggestions.
Thanks
The truck has fuel going to the intake and head (plugs smell and look moist from fuel), spark at each of the 4 plugs, and compression reads 125 on all 4 cylinders.
Can't figure out why it won't start. Looking for help or suggestions.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
bauergold
Hybrid / Engine Swaps
1
07-28-2017 05:15 PM