Engine Year question
 

I was bored and wanted to know the year of my engine,i was told it was a 2000 b18c1 when i bought it. so i looked at the stamps above the header and it reads like this /1 - 1/ - 1/7 -9/ so does this mean i have a 2001 motor https://honda-tech.com/forums/images/smilies/emthup.gif

Looks like it, all the 2000 ones I have seen have a 00 on the front left side in the series of numbers.

Re: (92b16vx)
 

yes but it only has a one on the first stamp /1

bump

Re: (vinasity)
 

Look at the serial # stamped in the block (not the head).

After B18C1 the 1st digit of the serial # is supposed to be the year, but interpreted like this... B18C1 was first available in 1994, so if the first digit is 1 it's a '94. If your engine is '00 the first digit should be 7.

Re: (JimBlake)
 

My 2001 B18C1 swap has a 0/0 on the first stamp on top of the exhaust manifold, I know for sure its a 2001 because I also carfaxed it.

Re: (Clicky Pow)
 

http://www.hondavision.com/photopost...yearofhead.jpg
https://honda-tech.com/forums/images...es/emsmile.gif

Re: (Clicky Pow)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Clicky Pow &raquo;</TD></TR><TR><TD CLASS="quote">My 2001 B18C1 swap has a 0/0 on the first stamp on top of the exhaust manifold, I know for sure its a 2001 because I also carfaxed it.</TD></TR></TABLE>
That is because it may have been cast in 2000, and not installed on the line untill later on.

Re: (92b16vx)
 

"Motors that are casted as 6 month or later are put into the next production year. So if the head had 91 then a 6-11, it would be from a 92 model car." - VTECVillain

Re: (JimBlake)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JimBlake &raquo;</TD></TR><TR><TD CLASS="quote">Look at the serial # stamped in the block (not the head).

After B18C1 the 1st digit of the serial # is supposed to be the year, but interpreted like this... B18C1 was first available in 1994, so if the first digit is 1 it's a '94. If your engine is '00 the first digit should be 7.
</TD></TR></TABLE> i checked and the first number is an 8 like in that pic the first circle has only a One diget it does not have two numbers.

Re: (vinasity)
 

here is a pic http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D

Re: (vinasity)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vinasity &raquo;</TD></TR><TR><TD CLASS="quote"> i checked and the first number is an 8...</TD></TR></TABLE>Sounds like it's a 2001 engine.

Re: (JimBlake)
 

so its a 2001 https://honda-tech.com/forums/images/smilies/emthup.gif