did a compression test and didnt get any results
 

put new rings, pr3 pistons, rod bearings, and stainless valves in my gsr. my car wouldnt start but its getting spark and fuel. when i checked tdc my intake cam was off a few notches (because my dumb ass was in a hurry and didnt put the distributor on right and it held the cam so that the timing belt skipped a couple of notches) so i set the timing back to tdc and did a compression test and got nothing. could i have bent my valves and therefore the valves arent seating properly causing no compression?????? let me know thanks

Re: did a compression test and didnt get any results (not so civic)
 

pos. do a leakdown test to find out. if it leaks from the int. manifold or exhast manifold or headers you bent the valves .