DPFI >> MPFI problems :(
#1
Thread Starter
Join Date: Jan 2006
Location: LRAFB, AR
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
DPFI >> MPFI problems :(
Hey guys ...
I did the DPFI to MPFI conversion last night and this morning.
it all went well .. expect that the ECU is throwing codes left and right.
it had code 4 which went away when we didn't use the stock wiring which had to be jumped ... Now I get code 9 ... the car runs , but runs like ***. It actually sounds like a rotary with a small bridgeport.... Idle is eratic and there is like absolutly NO torque... I checked and rechecked my wiring ... it seems to be good....
I am desperate ..
I am using :
D16A6 Intake mani
91 Mugen chipped ECU ( from SI )
D16A6 dizzy ... ( from same car as ECU ) both ran....
Injector resistor from a 90 integra ( has the 4 black wires and 1 red rather then the 4 red and 1 yellow/black )
sorry to disturb
help needed ASAP
Phil
I did the DPFI to MPFI conversion last night and this morning.
it all went well .. expect that the ECU is throwing codes left and right.
it had code 4 which went away when we didn't use the stock wiring which had to be jumped ... Now I get code 9 ... the car runs , but runs like ***. It actually sounds like a rotary with a small bridgeport.... Idle is eratic and there is like absolutly NO torque... I checked and rechecked my wiring ... it seems to be good....
I am desperate ..
I am using :
D16A6 Intake mani
91 Mugen chipped ECU ( from SI )
D16A6 dizzy ... ( from same car as ECU ) both ran....
Injector resistor from a 90 integra ( has the 4 black wires and 1 red rather then the 4 red and 1 yellow/black )
sorry to disturb
help needed ASAP
Phil
Thread
Thread Starter
Forum
Replies
Last Post
92hatchattack
Tech / Misc
2
06-11-2004 02:44 PM