Baker Precision - Ordered Earl's & got China
#1
Baker Precision - Ordered Earl's & got China
I recently ordered some earl's brakeline fittings and got all the fittings are stamped "china" no earl's packaging? is aeroquip made in china? or are these just generic.
parts I ordered:
tube sleeves
tube nuts
bulkhead Tee
npt-> an adpaters (90deg & straight)
I have spent quite a bit on earl's fiitings & cunifer line to make a custom setup - then found I needed a few more fittings & ordered this time from baker & this is what I got .... or am I over doing it? ok or ?
parts I ordered:
tube sleeves
tube nuts
bulkhead Tee
npt-> an adpaters (90deg & straight)
I have spent quite a bit on earl's fiitings & cunifer line to make a custom setup - then found I needed a few more fittings & ordered this time from baker & this is what I got .... or am I over doing it? ok or ?
#2
Honda-Tech Member
Join Date: Aug 2003
Location: Lakewood, ca, usa
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: Baker Precision - Ordered Earl's & got China
Aeroquip is 100% USA for sure. The only thing I got with China stamp on it where the Steel fittings from earls. but all there Alum fittings doesn't even have anything stamp on it. I dont even use earls anymore, I been using this brand called Red Horse and you can get it from baker too. The Red Horse stuff is made in china but its there own factory. All the alum fittings are 6061 T-6 Condition and hard anodizes. Its pretty good but forsure its not as good as Aeroquip or XRP. Good Luck with the fittings man!
Thread
Thread Starter
Forum
Replies
Last Post
cpforyou
Forced Induction
26
04-02-2004 09:42 AM
b18bvudoo
Forced Induction
11
01-02-2002 05:51 PM