FS: D-Series Jackson Racing Supercharger / SOHC JRSC
#1
Honda-Tech Member
Thread Starter
FS: D-Series Jackson Racing Supercharger / SOHC JRSC
<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.
i can get more pictures of anything that you would like to see, just PM me on honda-tech, and i'll head out to the garage and snap what you are interested in. STREETWERKZ = screenname
from my memory, i will include all these parts for the price of $1,100 might actually have more parts to include.
custom 3" cold air intake (for use of a supercharger)
B16 throttle body
ported S-tube portmatched to the B16 throttle body
jackson supercharger
EG fuel rail, DSM 450 injectors, B&M fuel pressure regulator
limited edition "fobtions" chipped and socketed PM6 ecu 2 programs.... one is a custom program for my setup with a 8,500 rpm redline, the other is the stock maps, with just a higher rev limit (8,000)
Apex-i SAFC II and obd - 0 plug in boomslang harness no wiring needed.... plug n play
various pulleys 6 psi to 11/12 psi
upgraded idler pulleys, machined billet with lips
hondata intake manifold gasket
UGR adjustable cam gear (new in box)
custom 4-1 supercharger header. its the same design as the kamikaze supercharger header, but its stainless steel.... looks pretty. short primaries into one large collector to large downpipe.
by the way, if you are DPFI....
this comes with an ECU, fuel rail, injectors, etc. the supercharger itself acts as the manifold.
i also have a resistor box, i can throw in too. this is the most complete JRSC selling on honda-tech today.
i had a case of NGK 7 spark plugs, if i can find them.... i'll throw them in too.
old hondata gasket.... with new hondata gasket in package.
http://i123.photobucket.com/al...68505
supercharger setup installed on my car. also.. custom intake and header are included. (perfect design for supercharged applications)
http://i123.photobucket.com/al...68558
side view... B&M fuel pressure regulator, EG fuel rail, DSM 450 injectors
http://i123.photobucket.com/al...68616
installed on my car with 2 other blower units..... kinda a weird picture, but i was stoked to have 3 blowers in my garage at the same time.
http://i123.photobucket.com/al...68690
m45 single cam supercharger next to my new m62 dual cam unit.
http://i123.photobucket.com/al...68752
adjustable cam gear still new in box (i can take actual photo, if you like)
http://www.undergroundracingus...r.jpg
single cam blower is in the front.
http://i123.photobucket.com/al...68797
various pulleys.... some will be includes.. anywhere from 6 psi to 11/12 psi depending on combinations.
http://i123.photobucket.com/al...68841
b&m with 90 degree bend and EG fuel rail fit perfectly on a JRSC
http://i123.photobucket.com/al...3.jpg
injector resistor box, for DSM 450s
http://i123.photobucket.com/al...2.jpg
DSM 450 injectors
http://i123.photobucket.com/al...1.jpg
SAFC II with stand
http://i123.photobucket.com/al...0.jpg
SAFC II again
http://i123.photobucket.com/al...9.jpg
plug N play boomslang OBD-0 harness for SAFC II
http://i123.photobucket.com/al...8.jpg
original SAFC II harness for anyone that is OBD-1 or OBD-2
http://i123.photobucket.com/al...6.jpg
boomslang harness
http://i123.photobucket.com/al...5.jpg
B16 throttle body next to a D16 throttle body (both OBD-0)
http://i123.photobucket.com/al...3.jpg
B16 and D16 throttle bodies
http://i123.photobucket.com/al...2.jpg
B16 throttle body mated to the ported S-tube.... (i guess i could have trimmed down the gasket a little. )
http://i123.photobucket.com/al...1.jpg
B16 throttle body on a D series motor
http://i123.photobucket.com/al...0.jpg
awesome ground clearance
http://i123.photobucket.com/al...9.jpg
header collector.... needs to be cleaned.
http://i123.photobucket.com/al...8.jpg
top view of the header
http://i123.photobucket.com/al...7.jpg
NEW cam gear
http://i123.photobucket.com/al...6.jpg
new UGR adjustable cam gear, never installed.
http://i123.photobucket.com/al...5.jpg
$1100 plus shipping
i have a ton of pictures and TWO videos of this thing in action
http://www.streetwerkzclothing...x.wmv
http://s77.photobucket.com/alb...0.flv
<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.
Modified by STREETWERKZ at 10:06 PM 12/1/2006
i can get more pictures of anything that you would like to see, just PM me on honda-tech, and i'll head out to the garage and snap what you are interested in. STREETWERKZ = screenname
from my memory, i will include all these parts for the price of $1,100 might actually have more parts to include.
custom 3" cold air intake (for use of a supercharger)
B16 throttle body
ported S-tube portmatched to the B16 throttle body
jackson supercharger
EG fuel rail, DSM 450 injectors, B&M fuel pressure regulator
limited edition "fobtions" chipped and socketed PM6 ecu 2 programs.... one is a custom program for my setup with a 8,500 rpm redline, the other is the stock maps, with just a higher rev limit (8,000)
Apex-i SAFC II and obd - 0 plug in boomslang harness no wiring needed.... plug n play
various pulleys 6 psi to 11/12 psi
upgraded idler pulleys, machined billet with lips
hondata intake manifold gasket
UGR adjustable cam gear (new in box)
custom 4-1 supercharger header. its the same design as the kamikaze supercharger header, but its stainless steel.... looks pretty. short primaries into one large collector to large downpipe.
by the way, if you are DPFI....
this comes with an ECU, fuel rail, injectors, etc. the supercharger itself acts as the manifold.
i also have a resistor box, i can throw in too. this is the most complete JRSC selling on honda-tech today.
i had a case of NGK 7 spark plugs, if i can find them.... i'll throw them in too.
old hondata gasket.... with new hondata gasket in package.
http://i123.photobucket.com/al...68505
supercharger setup installed on my car. also.. custom intake and header are included. (perfect design for supercharged applications)
http://i123.photobucket.com/al...68558
side view... B&M fuel pressure regulator, EG fuel rail, DSM 450 injectors
http://i123.photobucket.com/al...68616
installed on my car with 2 other blower units..... kinda a weird picture, but i was stoked to have 3 blowers in my garage at the same time.
http://i123.photobucket.com/al...68690
m45 single cam supercharger next to my new m62 dual cam unit.
http://i123.photobucket.com/al...68752
adjustable cam gear still new in box (i can take actual photo, if you like)
http://www.undergroundracingus...r.jpg
single cam blower is in the front.
http://i123.photobucket.com/al...68797
various pulleys.... some will be includes.. anywhere from 6 psi to 11/12 psi depending on combinations.
http://i123.photobucket.com/al...68841
b&m with 90 degree bend and EG fuel rail fit perfectly on a JRSC
http://i123.photobucket.com/al...3.jpg
injector resistor box, for DSM 450s
http://i123.photobucket.com/al...2.jpg
DSM 450 injectors
http://i123.photobucket.com/al...1.jpg
SAFC II with stand
http://i123.photobucket.com/al...0.jpg
SAFC II again
http://i123.photobucket.com/al...9.jpg
plug N play boomslang OBD-0 harness for SAFC II
http://i123.photobucket.com/al...8.jpg
original SAFC II harness for anyone that is OBD-1 or OBD-2
http://i123.photobucket.com/al...6.jpg
boomslang harness
http://i123.photobucket.com/al...5.jpg
B16 throttle body next to a D16 throttle body (both OBD-0)
http://i123.photobucket.com/al...3.jpg
B16 and D16 throttle bodies
http://i123.photobucket.com/al...2.jpg
B16 throttle body mated to the ported S-tube.... (i guess i could have trimmed down the gasket a little. )
http://i123.photobucket.com/al...1.jpg
B16 throttle body on a D series motor
http://i123.photobucket.com/al...0.jpg
awesome ground clearance
http://i123.photobucket.com/al...9.jpg
header collector.... needs to be cleaned.
http://i123.photobucket.com/al...8.jpg
top view of the header
http://i123.photobucket.com/al...7.jpg
NEW cam gear
http://i123.photobucket.com/al...6.jpg
new UGR adjustable cam gear, never installed.
http://i123.photobucket.com/al...5.jpg
$1100 plus shipping
i have a ton of pictures and TWO videos of this thing in action
http://www.streetwerkzclothing...x.wmv
http://s77.photobucket.com/alb...0.flv
<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.
Modified by STREETWERKZ at 10:06 PM 12/1/2006
#2
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
this is gonna sell quickly....
as soon as people found out i was swapping in a supercharged B series, they were asking about it.
get it now.
as soon as people found out i was swapping in a supercharged B series, they were asking about it.
get it now.
#3
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
if you PM me and dont bump my thread, i will not respond.
if you lowball, i will not respond.
i dont have to sell this, matter of fact, if i find a beater car, i will be throwing this setup into that.
will also sell complete swap for $1600 with trans and 10 lb. flywheel.
if you lowball, i will not respond.
i dont have to sell this, matter of fact, if i find a beater car, i will be throwing this setup into that.
will also sell complete swap for $1600 with trans and 10 lb. flywheel.
#4
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
will not part out, unless its something that isnt 100% required for the JRSC install.
#6
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (d16vtecx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d16vtecx »</TD></TR><TR><TD CLASS="quote">bump for something i want but can't afford</TD></TR></TABLE>
lets work out a deal for some b series stuff.
lets work out a deal for some b series stuff.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
by the way, if you are DPFI....
this comes with an ECU, fuel rail, injectors, etc. the supercharger itself acts as the manifold.
i also have a resistor box, i can throw in too. this is the most complete JRSC selling on honda-tech today.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sundownz »</TD></TR><TR><TD CLASS="quote">check e-mail and ims... I'll take it</TD></TR></TABLE>
pending to sundownz.
this comes with an ECU, fuel rail, injectors, etc. the supercharger itself acts as the manifold.
i also have a resistor box, i can throw in too. this is the most complete JRSC selling on honda-tech today.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sundownz »</TD></TR><TR><TD CLASS="quote">check e-mail and ims... I'll take it</TD></TR></TABLE>
pending to sundownz.
#11
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
two pending buyers.... one is coming by tonight to look at it in person.
#12
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (STREETWERKZ)
<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.
#14
Honda-Tech Member
Thread Starter
Re: FS: D-Series Jackson Racing Supercharger / SOHC JRSC (GiLis)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GiLis »</TD></TR><TR><TD CLASS="quote">lameassvideo</TD></TR></TABLE>
hahahahahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
idiot.
hahahahahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
idiot.
Thread
Thread Starter
Forum
Replies
Last Post
STREETWERKZ
Classifieds: Forced Induction
32
12-05-2006 11:24 PM
STREETWERKZ
Southern California (Sales)
45
12-02-2006 01:17 PM
STREETWERKZ
Northern California (Sales)
10
12-01-2006 09:07 PM
91civicEX
Classifieds: Forced Induction
2
01-10-2005 10:21 AM