G23 Ready block, high compression all motor set-up
06-30-2012, 10:17 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
G23 Ready block, high compression all motor set-up
The block is an F23 out of an accord,
Pistons and rings are brand new, H22 type-s, 0.5mm over stock
Rods have been shot peened and block has been bored and honed
Kaizenspeed balance shaft eliminator kit is also installed by machine shop
All assembly work was done by Nate at Nastie Garage,
the block is basically brand new and ready to install a H22 head on it
the compression wil be at around 12 or 13:1 depending on the head gasket used
ask me for any other questions you have
Looking for $600
NEW PRICE - $550!!
909-938-2431
Pistons and rings are brand new, H22 type-s, 0.5mm over stock
Rods have been shot peened and block has been bored and honed
Kaizenspeed balance shaft eliminator kit is also installed by machine shop
All assembly work was done by Nate at Nastie Garage,
the block is basically brand new and ready to install a H22 head on it
the compression wil be at around 12 or 13:1 depending on the head gasket used
ask me for any other questions you have
Looking for $600
NEW PRICE - $550!!
909-938-2431
Last edited by jdmcd7_cali-luv; 07-08-2012 at 11:09 PM.
06-30-2012, 09:05 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
06-30-2012, 09:06 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
07-01-2012, 07:32 AM
#8
Honda-Tech Member
Join Date: Sep 2011
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
07-04-2012, 08:32 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
Re: G23 Ready block, high compression all motor set-up
Like I said, it has been sitting for a while. It wouldn't be a bad idea to re-assemble the block
07-07-2012, 01:10 PM
#15
Honda-Tech Member
Join Date: Jul 2007
Location: anonymous built akrew, CA, U.S.A
Posts: 2,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: G23 Ready block, high compression all motor set-up
Bump for beast setup I'll buy it off or If u still have it in a couple of months .. Times are tuff rite now but bump for Donnie
07-08-2012, 11:33 AM
#16
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
