Complete JRSC B16/B18C5 Jackson Racing Supercharger Kit
#1
Complete JRSC B16/B18C5 Jackson Racing Supercharger Kit
For sale is a complete JRSC kit for B16/B18C5.
Serious inquiries only. Please don't waste my time.
Asking $1850 shipped (includes PP fees) to 48 US Continental States! What you see is what you pay!
Comes with everything for a complete plug and play setup. Manifold is original JR with all fittings + butterfly valve + air bypass valve. Blower is in very good condition with new coupler and fresh supercharger oil (less than 500 miles). Teflon is in very good condition with more than 95% coating left. Also includes an MVM Stepper that will work on any Honda Denso alternator (except for ITRs which has Mitsubishi type). This kit will allow you to run at least 7+ psi. As is, this is a very reliable setup for a street car.
* Original JRSC Manifold (for B16/B18C5) with fittings + butterfly valve + bypass valve
* M62 Blower + gaskets for inlet and outlet installed
* Original JR 3.8 Snout Pulley
* New Coupler installed + Fresh Supercharger oil
* S-Tube with studs
* MVM Stepper Pulley
* Alternator Bracket + Lower Tensioner
* Top Bracket + Tensioner + hardware for perfect shim
* Support Bracket + hardware
* 4040252 Alternator-to-Snout Poly-V Belt
* 4040325 Crank-To-Alternator Poly-V Belt
* VMS FPR Relocator
* myHondaHabit IM Thermal Gasket
* JR Replica Map Sensor Adapter
***Extras***
* Spare 4040252 Gatorback Poly-V Belt
* Spare 4040325 Gatorback Poly-V Belt
* Spare Supercharger oil (from what I had left)
* Spare Supercharger Oil Plug
* 2 x tubes of Hondabond
* Extra Hardware
* If I find any extra stuff I'll throw it in the baggy
See the items here: Video of everything
Can send additional pictures upon request
Serious inquiries only. Please don't waste my time.
Asking $1850 shipped (includes PP fees) to 48 US Continental States! What you see is what you pay!
Comes with everything for a complete plug and play setup. Manifold is original JR with all fittings + butterfly valve + air bypass valve. Blower is in very good condition with new coupler and fresh supercharger oil (less than 500 miles). Teflon is in very good condition with more than 95% coating left. Also includes an MVM Stepper that will work on any Honda Denso alternator (except for ITRs which has Mitsubishi type). This kit will allow you to run at least 7+ psi. As is, this is a very reliable setup for a street car.
* Original JRSC Manifold (for B16/B18C5) with fittings + butterfly valve + bypass valve
* M62 Blower + gaskets for inlet and outlet installed
* Original JR 3.8 Snout Pulley
* New Coupler installed + Fresh Supercharger oil
* S-Tube with studs
* MVM Stepper Pulley
* Alternator Bracket + Lower Tensioner
* Top Bracket + Tensioner + hardware for perfect shim
* Support Bracket + hardware
* 4040252 Alternator-to-Snout Poly-V Belt
* 4040325 Crank-To-Alternator Poly-V Belt
* VMS FPR Relocator
* myHondaHabit IM Thermal Gasket
* JR Replica Map Sensor Adapter
***Extras***
* Spare 4040252 Gatorback Poly-V Belt
* Spare 4040325 Gatorback Poly-V Belt
* Spare Supercharger oil (from what I had left)
* Spare Supercharger Oil Plug
* 2 x tubes of Hondabond
* Extra Hardware
* If I find any extra stuff I'll throw it in the baggy
See the items here: Video of everything
Can send additional pictures upon request
Thread
Thread Starter
Forum
Replies
Last Post
porofek
Classifieds: Forced Induction
4
07-08-2018 08:20 PM
Tuner Eddy
Southeast (Sales)
26
02-18-2009 05:30 PM
Tuner Eddy
Classifieds: Forced Induction
53
02-18-2009 05:29 PM