FS: Hondata S200 w/boost & P28 ECU
Trending Topics
08-17-2010, 03:32 AM
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Columbus, Georgia, USA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
08-18-2010, 03:38 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Columbus, Georgia, USA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
08-22-2010, 04:52 AM
#12
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Columbus, Georgia, USA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata S200 w/boost & P28 ECU
$225....if there's no interest at this price I'll just put it back on the shelf and hold on to it.
08-24-2010, 12:58 PM
#14
Honda-Tech Member
Join Date: Aug 2010
Location: Maryland
Posts: 2,686
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata S200 w/boost & P28 ECU
Do you have to wire or sodder anything for the 4 pin cable to plug into the ecu or is there already a spot there for it to plug in to? Sorry I'm new to tuning and I have been looking into an s200 system for a while. I have a chipped/socketed p28 from pherable.net. Do you have to install a hondata chip or is that 4 pin cable the only thing you have to do for it to function properly? Thanks for any help
08-24-2010, 01:10 PM
#15
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Columbus, Georgia, USA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata S200 w/boost & P28 ECU
From Hondata's website, "With the s200 it is recommended to cut jumper J12 inside the ECU. For US ECUs this jumper is located near the two vertical sub boards inside the ECU. For JDM ECUs remove J4 which is located on the top of the circuit board near CN2."
I believe that's the only modification needed.
I believe that's the only modification needed.
08-24-2010, 01:14 PM
#16
Honda-Tech Member
Join Date: Aug 2010
Location: Maryland
Posts: 2,686
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata S200 w/boost & P28 ECU
I did read that on their website but what i really need to know is did the cable running from the ecu to the s200 unit just plug in to a spot in the ecu or did the ecu have to be modified for it to plug in to the ecu? Thanks
08-25-2010, 03:30 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: Columbus, Georgia, USA
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata S200 w/boost & P28 ECU
I bought mine with the J12 jumper already cut and the 4-pin connector already hooked up. It looks like it just plugs in where jumpers went.
Thread
Thread Starter
Forum
Replies
Last Post
EcHoB18C1
Southern California (Sales)
3
07-30-2011 03:35 PM
