98 LS Door Lock Cylinder not working
#1
98 LS Door Lock Cylinder not working
So one day my door lock cylinder on the driver door stopped working. I can put my key in it and turn it both ways but it does nothing to the locks.
After I found this out I took the door panel off and looked at the actuator, even testing a new one and it all seemed fine, so I just lubricated everything up but it still didn't work (and now my lock on the inside is a bit sticky and will sometimes get stuck where the motor runs a bunch for a second trying to lock (like "clickclickclickclickclick") before going back to being unlocked. )
Do I need to replace the lock cylinder? Or is it something else.
After I found this out I took the door panel off and looked at the actuator, even testing a new one and it all seemed fine, so I just lubricated everything up but it still didn't work (and now my lock on the inside is a bit sticky and will sometimes get stuck where the motor runs a bunch for a second trying to lock (like "clickclickclickclickclick") before going back to being unlocked. )
Do I need to replace the lock cylinder? Or is it something else.
Thread
Thread Starter
Forum
Replies
Last Post
triple beam
Honda Civic / Del Sol (1992 - 2000)
1
01-13-2019 04:40 AM