testing waters sohc parts
I want to see if anyone is interested in helping me clean out my garage. I am currently not in the position to start shipping. If there is enough interest I should be able to start actual transactions soon.
Clutchmaster stage three clutch and pressure with an aluminum flywheel. They have plenty of life left in them. $450 + shipping. http://lordgabe.homelinux.net/...l.JPG http://lordgabe.homelinux.net/...p.JPG d16z6 head ported with 15 ferrea stainless valves, a skunk2 camgear, and a zex 59300 cam. It also has a three angle valve job on the intake and a five angle on the exhaust side. my map sensor went out blowing one of the valves. It also needs two of the valve cover bolt holes retapped. This head pulled hard for N/A. Over $1000 invested selling for $300 + shipping. http://lordgabe.homelinux.net/josh/d16z6head1.JPG http://lordgabe.homelinux.net/josh/d16z6head2.JPG LS rods peened to fit a d series engine with srp 9:1 comp pistons for d16 factory bore. $250 +shipping http://lordgabe.homelinux.net/...s.JPG D16y8 intake manifold with fuel rail no sensors $70 + shipping. GSR throttle body with an OBDO map adapter $60 + shipping Civic CX close cat Exhaust manifold. Perfect for a homemade turbo kit. $50 + shipping. http://lordgabe.homelinux.net/josh/cxmani1.JPG http://lordgabe.homelinux.net/josh/cxmani2.JPG D16A6 short block. $75 + shipping http://lordgabe.homelinux.net/josh/d16a6block.JPG nuespeed 550cc injectors for 92 to 95 civcs. they need grommets and o-rings. $75 + shipping. D-series Block gaurd. I don't remember what brand it is. $50 + shipping http://lordgabe.homelinux.net/josh/blockgaurd.JPG MSD RPM Switch with pills. New in box. $55 + shipping. http://lordgabe.homelinux.net/josh/rpmswitch.JPG PM6 ECU $50 + shipping. http://lordgabe.homelinux.net/josh/pm6ecu.JPG Feilds v-tec controller (sold) Modified by cfcrxsisohcvtec at 6:43 PM 9/26/2004 Modified by cfcrxsisohcvtec at 12:12 AM 11/4/2004 Modified by cfcrxsisohcvtec at 4:11 PM 11/5/2004 |
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
will the lsd fit my si tranny?
|
Re: testing waters sohc parts (1.6i-16zc)
it will fit any d-series tranny. But I think you have to get 90-93 integra axles to make it all work.
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
I also have a sony in dash minidisc changer for sale. $125+ shipping.
|
pm sent about pistons and rods.
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
|
Re: testing waters sohc parts (d357r0y)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
jaker, I haven't forgot about you I am working on getting the pics you requested.
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
PM and payment sent for that LSD. https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: testing waters sohc parts (d357r0y)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
Tell me a little more about the z6 head. Blown valve?
|
Re: testing waters sohc parts (93civiccxhatch)
I beleive it had about 60K on it when I purchased it. I had a machine shop in my area port it and give it an angled valve job. They also freshened it up. They did a partial rebuild. In other words they replaced pretty much everything but the valve springs and retainers. the valve cover bolts gave loose later. I only put around 3K to 5K on the head myself and it made a dramatic difference in my performance while it lasted. I had intended to go forced induction with it. Now I am just looking to do a B-series swap so I have no need for this head. If there is anything else you would like to know feel free to ask. I can be contacted via e-mail at cny71057@centurytel.net Thanks.
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
Note in the picture of the d16z6 head the bottom left valve of the third combustion chamber from the left has got the hole in it. It will need a new valve and reseating.
|
Re: testing waters sohc parts (cfcrxsisohcvtec)
ttt
|
All times are GMT -8. The time now is 04:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands