Kseries Drag Car Partout - AEM/Precision/TiAL
11-10-2015, 03:06 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Kseries Drag Car Partout - AEM/Precision/TiAL
For sale is my K-series drag build. Selling because I am moving into starting my own engineering business and my interests have shifted from drag racing to road racing. All prices are firm and shipped to the lower 48 unless otherwise noted.
Payment will only be taken in the form of Paypal including 3% fee (unless payment is gift).
*PLEASE NOTE - Most of this setup was fabricated by me. I got to the point that the car fired and idled and other than being driven from the trailer to the garage, the setup has literally zero miles or pulls on it. EVERYTHING is brand new unless otherwise noted.
Prefer to keep packages as one. I am happy to work with you if you are going to buy multiple things.
Below are pictures of the car to show the setup and how everything was pieced together. Please see my build thread located here for more information about the build. My High HP Kseries EK Drag Build - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum
AEM EMS V2 - KSERIES Version - $1100 shipped
- Will come in original box and all necessary cables will be included
Intake Manifold Package - $1000
Large Volume Intake Manifold
75MM Ford Mustang Throttle Body W/ TPS sensor
- Fly cut flange for perfect flatness
- 1/8" 6061 Aluminum Construction
- Individual velocity stacks for each runner
- 8 Injector Ports
- Full array of 1/8" NPT vacuum ports on bottom
- 3" Vband assembly welded on TB
- Powdercoated silver metallic (has an amazing flake in it that I can't capture in pictures)
- Custom Upper Water Neck with 16AN fitting
*2 Notes - Must have electric water pump setup - EKK1 Mounts will need very minor rad support trimming.
Garrett 1000HP Front Mount Intercooler - $800
-Custom Backdoor Endtank Setup (will receive 3" Vband Assembly)
-Endtanks are swept back to provide nice tight fit against front bumper
-Can weld new support brackets on at buyers request
Precision Billet 6766 Turbocharger - $1200
- T4 Divided Housing / 1.00AR / Vband Outlet
- HP Compressor Cover (4" In / 3" Out)
- 90* Elbow welded on
- 3" Vibrant VanJen Clamp
- Custom Silver Metallic Flake Powdercoat (Again, cannot do it justice at all with pictures)
- T4 Turbo Blanket (pictured in car pictures only)
- Turbo is brand new - no dyno runs or track time
Kseries Sidewinder T4 Divided Exhaust Manifold - $1200 (All)
- Twin 38MM MV-S flanges
- Full 4" Uppipe with O2 Bung
- Twin 1.75" Wastegate Dumps
* Please note, I cannot speak for the fit of the Uppipe with EKK2 mounts/EG.
Two New Black 38MM Tial MV-S Wastegates ($235EA/$425Both) OBO
-Will come with all standard hardware and clamps (most importantly including fire rings)
-The gates have a 13-14psi spring set in them
-Full Disclosure - Top of wastegates both have thread damage due to aluminum fittings. Continue to be fully adjustable and sealed, however they will not come out very easily.
Golden Eagle Pro Series Black Kseries Fuel Rail - $90
- 6AN in / 8AN out black fittings included
Five-O Motorsports 1000CC Injectors - $300
- Used as SECONDARIES ONLY - Never fired
XS Power S1600 16V battery and charger - $425
Neptune Tunerview with Hondata link - SOLD
Civic Half Radiator w/ Fan - $100
- 16AN top port / 12AN bottom Port
- Has Fan Switch on lower side.
Things that are still available but not yet pictured (can be seen in the build thread)
Magnaflow MP-4301 Fuel Pump - $425
Custom ~2.5gal stock location fuel cell - $350
Kseries CC Twin Disk - Used - $800
Possibly more to come.
Please bump if you view!
Thank you,
Aaron
Payment will only be taken in the form of Paypal including 3% fee (unless payment is gift).
*PLEASE NOTE - Most of this setup was fabricated by me. I got to the point that the car fired and idled and other than being driven from the trailer to the garage, the setup has literally zero miles or pulls on it. EVERYTHING is brand new unless otherwise noted.
Prefer to keep packages as one. I am happy to work with you if you are going to buy multiple things.
Below are pictures of the car to show the setup and how everything was pieced together. Please see my build thread located here for more information about the build. My High HP Kseries EK Drag Build - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum
AEM EMS V2 - KSERIES Version - $1100 shipped
- Will come in original box and all necessary cables will be included
Intake Manifold Package - $1000
Large Volume Intake Manifold
75MM Ford Mustang Throttle Body W/ TPS sensor
- Fly cut flange for perfect flatness
- 1/8" 6061 Aluminum Construction
- Individual velocity stacks for each runner
- 8 Injector Ports
- Full array of 1/8" NPT vacuum ports on bottom
- 3" Vband assembly welded on TB
- Powdercoated silver metallic (has an amazing flake in it that I can't capture in pictures)
- Custom Upper Water Neck with 16AN fitting
*2 Notes - Must have electric water pump setup - EKK1 Mounts will need very minor rad support trimming.
Garrett 1000HP Front Mount Intercooler - $800
-Custom Backdoor Endtank Setup (will receive 3" Vband Assembly)
-Endtanks are swept back to provide nice tight fit against front bumper
-Can weld new support brackets on at buyers request
Precision Billet 6766 Turbocharger - $1200
- T4 Divided Housing / 1.00AR / Vband Outlet
- HP Compressor Cover (4" In / 3" Out)
- 90* Elbow welded on
- 3" Vibrant VanJen Clamp
- Custom Silver Metallic Flake Powdercoat (Again, cannot do it justice at all with pictures)
- T4 Turbo Blanket (pictured in car pictures only)
- Turbo is brand new - no dyno runs or track time
Kseries Sidewinder T4 Divided Exhaust Manifold - $1200 (All)
- Twin 38MM MV-S flanges
- Full 4" Uppipe with O2 Bung
- Twin 1.75" Wastegate Dumps
* Please note, I cannot speak for the fit of the Uppipe with EKK2 mounts/EG.
Two New Black 38MM Tial MV-S Wastegates ($235EA/$425Both) OBO
-Will come with all standard hardware and clamps (most importantly including fire rings)
-The gates have a 13-14psi spring set in them
-Full Disclosure - Top of wastegates both have thread damage due to aluminum fittings. Continue to be fully adjustable and sealed, however they will not come out very easily.
Golden Eagle Pro Series Black Kseries Fuel Rail - $90
- 6AN in / 8AN out black fittings included
Five-O Motorsports 1000CC Injectors - $300
- Used as SECONDARIES ONLY - Never fired
XS Power S1600 16V battery and charger - $425
Neptune Tunerview with Hondata link - SOLD
Civic Half Radiator w/ Fan - $100
- 16AN top port / 12AN bottom Port
- Has Fan Switch on lower side.
Things that are still available but not yet pictured (can be seen in the build thread)
Magnaflow MP-4301 Fuel Pump - $425
Custom ~2.5gal stock location fuel cell - $350
Kseries CC Twin Disk - Used - $800
Possibly more to come.
Please bump if you view!
Thank you,
Aaron
Last edited by SovXietday; 11-15-2015 at 03:56 PM.
11-16-2015, 04:04 PM
#6
Honda-Tech Member
Join Date: Nov 2006
Location: Oklahoma City, Oklahoma, USA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SovXietday
Classifieds: Forced Induction
44
08-31-2016 05:44 PM
bergenholtzracing
Drag Racing
42
11-24-2008 09:36 AM