fast[R]

I am posting this stuff for a friend, this is what he has left from the car.
All these items are like new

Hardcore race parts for Honda or other car. Tein, Tilton,
Bogart, Accel etc.

_________________
For info email to johnveloso@hotmail.com or call 905-473-5022

Accel DFI Gen 7 for Honda 4cyl with Harness and sensors.
This is the latest version of Accel's popular Gen VII system. The
system was used for one race season on a B-series powered car. It's
wired and ready to be plugged into any B-series motor and tuned
however it can be used on any 4cyl Honda just as Accel intended. The
system comes with everything as directly from Accel with manual and CD
and is in like brand new condition. Being sold as another management
manufacturer is giving us a different unit, there is nothing wrong
with this just sponsorship changes for the car.

Asking $1150 (u.s.) or $1500 (cad)





Crane Fireball Hi-6 DSR Ignition with LX92 coil
Crane ignition system in like new condition, used in conjunction with
the Accel computer system. Again this system is in perfection
condition and is also being removed due to changes in sponsorship for
the cars management system. This ignition will work on any 4/6/8cyl
car and comes with all wiring and parts needed to get it working on
your car. Its great for any NA or Turbo car that needs a powerful
ignition system.

Asking $230 (u.s.) or $300 (cad)





Bogart Front Drag-on-fly 13x8 wheels with Hoosier 24.5x8x13 slicks

Bogart Drag-on-fly rims in great condition with Hoosier slicks. The
slicks have maybe 10 passes at the track on them. They were replaced
early in the season as the car was sponsored by M&H and they needed to
be removed. They are great for any turbo or fast NA car. These come
with the proper nuts for a Honda or similar thread.

Asking $535 (u.s.) or $700 (cad) Don't want to separate rims and
rubber.


(They were just washed before this picture to clean up the rim and
tire which is why the tires look shiny)


Bogart Rear Drag-on-fly 15x4.5 skinny with Moroso 25x4.5x15 tire
Bogart Drag-on-fly rear skinnys in great condition. The tires are
the matching set for the slicks above with 10 passes on them. They
were also replaced early in the season due to the M&H sponsorship.
Very light and a great replacement for rear rims on a street/strip
car. No lug nuts come with these, though you can buy them through
McGuard cheaply.

Asking $380 (u.s.) or $500 (cad)


(M&H tire shown, Moroso rear skinny visually the same but
says "Moroso" on the sidewall all in black.)


Tein Coilover Suspension System Type RA for Type-R
Tein Type RA's with everything needed to install on your Type-R or
Integra with Type-R rear lower control arms. This is a great
adjustable suspension system that is compatible with the EDFC unit
(also for sale). Great for guys who want a superior street
suspension or Road course their cars. Can be used for drag as well
with the proper setup, overall a very nice suspension system. This
system is less than 1 year old and in mint condition used very little
on a non-street car.

Asking $1375 (u.s.) or $1800 (cad)

[img]
http://www.etdracing.com/sale/tein2.jpg[/img]


Tein EDFC (Electronic Damping Force Controller)
This EDFC controls your suspension settings on your Tein suspension
remotely and electronically. You can adjust your suspension settings
from inside the car. These work with any Tein suspension that is
compatible with the EDFC (if your not sure ask Tein if it works).
This system is really cool for a street or road course car. This was
used in conjunction with the Type RA's above and is also in mint
condition and less than 1 year old. Comes with everything to install
and run.

Asking $305 (u.s.) or $400 (cad)






Honda Moroso replacement Distributor and Distributor cap
This is Moroso's replacement distributor and clear blue cap. It's
an OBD1 GSR distributor but will fit B16, GSR and Type-R. This
distributor is a brand new unit not re-manufactured unit built by
Moroso to replace the fail prone stock unit. It was used on a car for
half of a race season and is in great condition. Again with changes
in sponsorship this part is being removed, it is in perfect working
condition.

Asking $150 (u.s.) or $250 (cad)




TCI Stage 5 drive axels with Hubs for Honda (Two Sets
available)
These TCI Stage 5 axles are super strong and will get your car down
the ¼ without breaking. They come with special hubs which are larger
diameter than stock Honda hubs for superior strength and durability.
The shafts have been used for 3-4 passes at the track and the hubs are
brand new (our car has custom hubs). We have hubs available for
Civic, GSR and CRX just let us know when you buy what car you have and
we'll send you the proper hubs. We have only one set of each style
of hub available so we will be able to supply one Civic and one GSR
set or one Civic and one CRX set and so on.

Asking $610 (u.s.) or $800 (cad) per set.


The color has nothing to do with the shaft, they are the same. These
are just from different sets which were around for the picture.

This is TCI (top) vs Stock (bottom)


Tilton Single Disc clutch and Unorthodox Aluminum Flywheel combo
B-Series
Now is your chance to get a super deal on a Tilton clutch. We don't
have to tell you how good these are or how much this will benefit your
car. This is definitely not a street clutch it's for Race only. This
clutch was used for one event near the end of the year before being
removed. It has literally two maybe three ¼ mile passes on it and is
practically brand new. It will fit any b-series transmission and we
have release bearing for both hydraulic and cable style trans, specify
when ordering.

Asking $1150 (u.s.) or $1500 (cad) Can not separate clutch &
flywheel must go together.









Modified by fast[R] at 10:26 PM 1/16/2004

fast[R]

up

Red D Dragon

i gotta give you a bump for some nice *** parts.

fast[R]

**** this board moves fast up

fast[R]

up

Ekizzle

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Red D Dragon &raquo;</TD></TR><TR><TD CLASS="quote">i gotta give you a bump for some nice *** parts.</TD></TR></TABLE>

fast[R]

Thank you, these parts are almost new
UP

fast[R]

Bump

fast[R]

up

fast[R]

up

Sliced Beard

excuse me while i go play with myself

i mean bump for some nice a$$ parts

Adub33

Bump for a great seller.