FS: Wiseco pistons 13.5:1 84.5mm K594M845
11-21-2012, 07:29 AM
#1
FS: Wiseco pistons 13.5:1 84.5mm K594M845
SOLD
Wiseco pistons K594M845
engine - B series with VTEC or non VTEC head
bore - 84.5mm
dome - +8.25cc
compression - 13.2-14.2:1 depending on head.
Full specs - http://www.wiseco.com/Catalogs/Sport...AcuraHonda.pdf
These pistons are used and in good condition. The skirts have light scratches in the moly coating but not into the aluminum. I had the domes ceramic coated which cost me an additional $120. These will come with NEW ring packs and NEW pin locks (circlips). I have NEW upgraded S733 HD wrist pins for these pistons however I would not recommend these pins for an NA motor. I pulled these pistons from a running engine to change my compression and I will be buying a new set so I can get the S561 light pin if you want. Your choice of new wrist pin - Light, Standard or HD.
$450 Shipped including Paypal fees
Wiseco pistons K594M845
engine - B series with VTEC or non VTEC head
bore - 84.5mm
dome - +8.25cc
compression - 13.2-14.2:1 depending on head.
Full specs - http://www.wiseco.com/Catalogs/Sport...AcuraHonda.pdf
These pistons are used and in good condition. The skirts have light scratches in the moly coating but not into the aluminum. I had the domes ceramic coated which cost me an additional $120. These will come with NEW ring packs and NEW pin locks (circlips). I have NEW upgraded S733 HD wrist pins for these pistons however I would not recommend these pins for an NA motor. I pulled these pistons from a running engine to change my compression and I will be buying a new set so I can get the S561 light pin if you want. Your choice of new wrist pin - Light, Standard or HD.
$450 Shipped including Paypal fees
Last edited by Muckman; 12-26-2012 at 03:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Turbo-LS
Classifieds: Forced Induction
19
02-22-2007 06:07 AM
DriveSlowHomie
Northern California (Sales)
1
06-10-2006 11:20 PM
smoovy
Classifieds: Forced Induction
15
08-29-2005 04:28 PM