FS: Ls/Vtec 0r B20/Vtec Conversion set up
05-07-2004, 08:27 AM
#1
Thread Starter
Join Date: Oct 2003
Location: Check_A_Hoe, Tx, USA
Posts: 1,686
Likes: 0
Received 0 Likes
on
0 Posts
FS: Ls/Vtec 0r B20/Vtec Conversion set up
I will take Pay Pal Payments Only $230 shipped obo
Located in DFW area
The kit includes:
- 1. Golden Eagle Vtec Conversion Sandwich Plate with a -6AN fitting for the plate and head.
- 2. -6AN steel braided teflon hose for oil supply
- 3. Golden Eagle Vtec Conversion Dowels for proper alignment of the head and block without machining
- 4. 1/8 NPT tap and plug for the oil port in the head
- 5. Golden Eagle worked factory head gasket with any bore size and dowel holes opened for any application
-When we say " NO Machining " we mean that there is no reason that anyone cannot do this kit in their own garage. - The only thing that must be done is tapping the head for the plug .
- The VTEC line and fitting all use existing ports with no need to do anything else.
Located in DFW area
The kit includes:
- 1. Golden Eagle Vtec Conversion Sandwich Plate with a -6AN fitting for the plate and head.
- 2. -6AN steel braided teflon hose for oil supply
- 3. Golden Eagle Vtec Conversion Dowels for proper alignment of the head and block without machining
- 4. 1/8 NPT tap and plug for the oil port in the head
- 5. Golden Eagle worked factory head gasket with any bore size and dowel holes opened for any application
-When we say " NO Machining " we mean that there is no reason that anyone cannot do this kit in their own garage. - The only thing that must be done is tapping the head for the plug .
- The VTEC line and fitting all use existing ports with no need to do anything else.
Thread
Thread Starter
Forum
Replies
Last Post
deary09
Southern California (Sales)
41
11-09-2011 05:16 PM
1slowEK
All Motor / Naturally Aspirated
32
06-08-2005 10:16 AM
