all_motor_mike

The heads are fully race ported by me every area of the ports and chambers were reworke as u can see bellow..... I don't have the extra $$$ for the valve train parts or I would have the machine work done and sell them ready to bolt on. If u have parts for them and would like me to finish them u can send the parts my way ill have the machine work and any touch ups taken care and assemble as long *** the buyer pays for the machine work obviously. Any questions lmk. Both have cam caps and the b18 head will come with rockers/shafts and lma's. With new guides in them I would like to get 850.00 shipped for the b18 and 700.00 shipped for the d16 head.










































Ok so this wad16 head.....






































Mike

dc2_530

iTrader: (4)

Do you do any port and polish work alone? Because I have a head I want to get p&p

dc2_530

iTrader: (4)

Do you do any port and polish work alone? Because I have a head I want to get p&p

all_motor_mike

Yes, all the time. The AMM is short for all motor mike btw, its all me sir...... Porting fabbing and engine building.


Mike

dc2_530

iTrader: (4)

Pm me with pricing for p&p on a Gsr head its been rebuilt and just needs a good p&p

209lsr_ly

iTrader: (1)

cfm flow numbers?

all_motor_mike

No, I would need the guides valves and valve job done in order to get them. Stocker intake and exhaust numbers at. 500" was 251/190 so to be conservative I would guess 290/230. I didn't do before numbers on the d16 head as I just wanted to port it and sell it.


Mike

all_motor_mike

Also, Ill take 150.00 off the price of both heads if somebody wants them with no guide.


Mike

jdmdb8r

iTrader: (5)

up

all_motor_mike

Well I need money, so the price for them without guides is now 650.00 for the b18 and 500.00 for the d16.


Mike

all_motor_mike

Too much still, how about 600.00 and 450.00, help me out here guys.


Mike

all_motor_mike

TTT

550.00 and 400.00 now


Mike

inteman

have you ran a head that you did the work on? so with race port you mean its port to the max(3 angle valve job etc...stage 1,2,3,5?) or comparable to a stock b18c5 head? the works looks great, what would you recommend to use for valvetrain? interested.

all_motor_mike

Yes so have many neon and dsm enthusiasts. When I say race port Im basically saying that everything is reworked. I could remove more material from the intake ports but didn't want to cause I didn't want to run into any cracking issues that have been see before. Both sides are gaskets matched except thr floor of the exhsust ports to help with antireversion. There is no guides or machine work done to these heads the buyer will have to get all the valve train parts and then take it to a machine shop of their choice and have the work done. Unless ur referring to having me do the machine work and assembly with the valve train supplied by u. I like si valve train parts because that's what I've always ran and never had problems with them, not to mention I get the best pricing on it compared to others.


Mike

inteman

thanks for the info, can you do 550.00 shipped on the b18c1 to anchorage. ak 99501.

all_motor_mike

No, I've dropped the price quite a bit if u want me to ship it to alaska then im gonna need 600.00. The only reason I say that is because the last time I shipped a head there it cost me 90.00. I usually include my shipping into the asking price as long as it's going some where in the lower 48 but shelling out another 50.00 of my portion I don't want to do. Sorry sir.


Mike

all_motor_mike

one day ill sells these. price has dropped another 50.00. so looking for 500.00 shhipped to the lower 48 for the b18c1 and 350.00 for the d16y8. also if any of u guys have anything ur interested in me porting just lmk.

anyone interested can call or text me at 623-806-5003 if u prefer


mike

Jdm94Coupe

Tempting.

all_motor_mike

doooo it!!!



mike

all_motor_mike

to help this go cause i really could use the moiney right now ill let it go for 450.00 shipped to the lower 48 only if its before this thursday. and 300.00 for the d16y8.


mike

Poppin

wow that is really a good price!!!

all_motor_mike

i think its more then fair considering theres no core or anything. basically ur buying a head and u get to choose the parts and the machinist for them. im no hack job my neon and eco heads see over 300cfm and my dsm heads are up in the 290 cfm range. based on the b18c1 intital flow numbers i know the intakes are gonna be 290cfm+. anyways all that being said.......... TTT. prices are back up to 500.00 and 400.00. shipped


mike

all_motor_mike

TTT


Mike

all_motor_mike

going up



mike

all_motor_mike

b18 is sold still have the d16y8 head.......... looking to get 220.00 shipped for it.


mike