Darg car engine swap!!! B20 VTEC 275WHP!!!!
 

I think the time has come to go K. The engine build has been on here before. The drag car went 11.28 @120 with this engine. Here's the build again
NO LONGER FOR SALE!!!!!!!!!!!!!!!!!!
b20b4 block
Bdl block guard
Wiseco pistons 84.5mm 8.6 CC dome (modified) balanced
Compression 14.3:1
Probe rods machined oil squirter holes and machined for type R bearings, balanced
ls crank knife edged and balanced
b16 full competition head porting by PURE TUNING.
Supertech valve springs
Supertech .5 mm intake and exhaust valves
Skunk2 Pro 2 cams
Skunk2 Pro series cam gears
Eriks Racing 72 mm throttle body
Edlebrock victor x intake manifold Cut apart and ported
Precision 440 cc injectors
fuel pressure reg and guage
b16 trans
Act Hdss with a 6 lb flywheel
JDM Itr 4.785 final drive
Richmond spool
Msd SCi ignition with blaster coil
Nology sprak plug wires
Custom valve cover with -12 fittings out the front for the breather can
Currently runs on Sonoco 110 octane race gas


pics
https://i87.photobucket.com/albums/k...y/DSC00165.jpg
https://i87.photobucket.com/albums/k...y/DSC00166.jpg
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg





Modified by BearsEK-KMSU at 1:51 PM 3/3/2008

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (bearsEK)
 

Very sick NA set-up. https://honda-tech.com/forums/images/smilies/emthup.gif

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (91' LS-VTEC)
 

wholly sh*t, those are some sweet numbers for an N/A motor, https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (EJ8 944)
 

Thanks i hate to sell it but it has been a champion and the dyno chart is on skunks website. The most na power from a sknuk2 pro 2 ever according to there info. especially being a 84.5x89 its not very big.

wow that some serious n/a power...bump for you

Great HP. https://honda-tech.com/forums/images/smilies/emthup.gif

Free bump.

Re: (EFSedan#6)
 

bump man, awesome looking setup

Re: (KEVLARsh)
 

is this mike motor? bumpd for looking! if so, it's really fast!

Re: (talespinc)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by talespinc &raquo;</TD></TR><TR><TD CLASS="quote">is this mike motor? bumpd for looking! if so, it's really fast!</TD></TR></TABLE>
Yes it is! https://honda-tech.com/forums/images...es/emsmile.gif

Re: (bearsEK)
 

damn. sweet setup.

free bump! https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (AccordSleeperZzZ)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AccordSleeperZzZ &raquo;</TD></TR><TR><TD CLASS="quote">damn. sweet setup.

free bump! https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE> https://honda-tech.com/forums/images/smilies/emthup.gif

hey mike, this is andrew! good price on that set-up! someone will be happy. Now I will need your guidance for a nice K build-up! https://honda-tech.com/forums/images...es/emsmile.gif

Re: (boostedwagon)
 

wow, that is some crazy numbers from a n/a B-series

Re: (boostedwagon)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedwagon &raquo;</TD></TR><TR><TD CLASS="quote">hey mike, this is andrew! good price on that set-up! someone will be happy. Now I will need your guidance for a nice K build-up! https://honda-tech.com/forums/images...es/emsmile.gif</TD></TR></TABLE>
Thanks dude!. I think it is very fair price for its performance and flawless reliability!!! It is def. proven https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images...s/emsmileo.gif

if i was sticking with b-series, i would probably buy it and de-tune/de-mod it a bit.

Re: (boostedwagon)
 

Hell of a set-up! Seen it run awhile back at Joliet!

https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (JDMisGOOD)
 

Bump for a great deal.

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (bearsEK)
 

bump for a friend

is darg something new?


spellcheck owns https://honda-tech.com/forums/images...s/emsmilep.gif

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (1_bad_EF)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1_bad_EF &raquo;</TD></TR><TR><TD CLASS="quote">bump for a friend

is darg something new?


spellcheck owns https://honda-tech.com/forums/images...s/emsmilep.gif </TD></TR></TABLE>
Thanx for pointing that out bitch https://honda-tech.com/forums/images...s/emsmilep.gif we have to get together soon!

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (bearsEK)
 

REALLY NICE NUMBER... AND THE BLOCK IS NOT SLEEVE

hell yah for b20!

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (1320DRAGWORKX)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1320DRAGWORKX &raquo;</TD></TR><TR><TD CLASS="quote">REALLY NICE NUMBER... AND THE BLOCK IS NOT SLEEVE </TD></TR></TABLE>
Not sleeved, i think the race gas is the only reason it hasn't broke https://honda-tech.com/forums/images...s/emsmilep.gif
Bump, for anyone that wants damn near turn key race drivetrane!!!

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (bearsEK)
 

bump

Re: Darg car engine swap!!! B20 VTEC 275WHP!!!! (BearsEK-Kingmotorsports)
 

ttt

good deal!