Cleaning out garage sale...
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2006
Location: Panama City, FL
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Cleaning out garage sale...
Ok, I have compiled a lot of the parts that I've accumulated over the years and don't need any more. Most of this stuff will be sold for the best offer. Dont hesitate to ask questions because I'm sure I'll forget something, this is a lot of stuff. Some of this isnt even for a honda. Who knows, maybe someone will need it.
ALSO: http://www.hondamarketplace.com/show....php?t=2565123
downpipe for an h22 that was ran on an EG
Next, ACL rod bearings, thrust washers, and ARP rod studs for a b18b
Autometer narrowband guage
D series fuel rail
P06 ECU
H22 valve cover
Turbosmart BOV
obd1 b series oil pump
t25 off an sr20. HAS to be rebuilt
a USDM EG headlight
Factory front and rear control arms from an EG civic
EG bezel, will not come with the clock
EG coupe/hatch body trim
Intercooler piping off an EG
Intercoolers, the big one is off an EVO
LS obd1 power steering pump
Here is a box of engine parts. he box contains: all internals of an ls head, all assembly bolts, vtec oil pan (p72), girdle milled to fit ls main caps but wasnt milled enough (still good but will only work for ls caps if remilled to the right amount), vtec windage tray, oil pickup, obd2 p72 oil pump, misc hoses, non vtec distributor
and the head that goes with said internals
exhaust hanger
JIC coilover adjustment wrenches
b18b crank timing belt sprocket
EG hatch rear wiper
GSR pistons and rods. A rod is bent but the pistons are fine. Would compliment a lsvtec head swap nicely..
EG Stanley and DEPO corner lights
OBD1 non vtec wiring harness
DSM cam angle sensor
240sx hatch cover
4g63 cam gear cover
5th gen prelude fuel door
Windshield squirters
Factory MAP sensor
d15b cam gear cover
I also have a jdm d15b oil pan (untapped), basically brand new dipstick, d series alt, starter, 5th gen prelude neuspeed lowering springs, 5th gen prelude trunk interior, misc. stock springs and shocks, ac parts for 92-95 civic, and center console and vents for 96-00 civic. Will post pics when i can. All these items are obo as well.
ALSO: http://www.hondamarketplace.com/show....php?t=2565123
downpipe for an h22 that was ran on an EG
Next, ACL rod bearings, thrust washers, and ARP rod studs for a b18b
Autometer narrowband guage
D series fuel rail
P06 ECU
H22 valve cover
Turbosmart BOV
obd1 b series oil pump
t25 off an sr20. HAS to be rebuilt
a USDM EG headlight
Factory front and rear control arms from an EG civic
EG bezel, will not come with the clock
EG coupe/hatch body trim
Intercooler piping off an EG
Intercoolers, the big one is off an EVO
LS obd1 power steering pump
Here is a box of engine parts. he box contains: all internals of an ls head, all assembly bolts, vtec oil pan (p72), girdle milled to fit ls main caps but wasnt milled enough (still good but will only work for ls caps if remilled to the right amount), vtec windage tray, oil pickup, obd2 p72 oil pump, misc hoses, non vtec distributor
and the head that goes with said internals
exhaust hanger
JIC coilover adjustment wrenches
b18b crank timing belt sprocket
EG hatch rear wiper
GSR pistons and rods. A rod is bent but the pistons are fine. Would compliment a lsvtec head swap nicely..
EG Stanley and DEPO corner lights
OBD1 non vtec wiring harness
DSM cam angle sensor
240sx hatch cover
4g63 cam gear cover
5th gen prelude fuel door
Windshield squirters
Factory MAP sensor
d15b cam gear cover
I also have a jdm d15b oil pan (untapped), basically brand new dipstick, d series alt, starter, 5th gen prelude neuspeed lowering springs, 5th gen prelude trunk interior, misc. stock springs and shocks, ac parts for 92-95 civic, and center console and vents for 96-00 civic. Will post pics when i can. All these items are obo as well.
Last edited by Jvs10; 05-08-2009 at 04:24 PM.
Trending Topics
#16
Honda-Tech Member
iTrader: (25)
Re: Cleaning out garage sale...
Can you email me a price for the B18b thrust washers and ARP rod studs shipped to 45013? Whiteacclude@yahoo.com
#21
Honda-Tech Member
Thread Starter
Join Date: Jun 2006
Location: Panama City, FL
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleaning out garage sale...
No problem and dont have a clue who welded the dump tube. No room for complaints. I threw that in for free.. Have it cleaned up a little and itll be fine.