ChaseBays Harness built to your Specs!!
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Bay Area
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
ChaseBays Harness built to your Specs!!
:: DESCRIPTION ::
I purchased a harness from chase a while back, my engine was stolen before i received the harness. So i am selling the harness i originally purchased from chase at a discounted price so i can get rid of it faster. since it wasn't selling chase agreed to make a new one to the buyers specs in order for me to make a quick sell.
Since he has to start from scratch for the fastest turn around time i recommend having it done with Braided loom rather than heat shrink (i think the braided loom looks nicer, Check out my build thread for pics of loom)
:: SPECS ::
The harness You are purchasing is the B-Series CM2 harness
The CM1 v2 harness features all new commercial grade high heat wire (rated from -49° to +257° F), individually striped for easy identification and all new sensor plug pins. It is covered in full flame retardant nylon sleeving (Operating Temperature Range -103° to 257°F; Melt temp 446°F), and adhesive lined heat shrink. All engine harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind. It has a lot of R&D done for proper wiring technique, with all shielded wire used where needed. It features a stealthy look but is also easily accessed, keeping the motor easily worked on. This harness is a great start for someone looking to clean up their engine bay and replace the used or worn down stock harness.
CM2 Harness – The CM2 harness features all the same great aspects and design of the CM1 harness but adds a Mil Spec quick disconnect firewall connector and Raychem connector boot. With the CM2 K series harness you get an additional option for harness routing, which is through the valve cover and out the back side of the motor. If you choose this option it will include a free rivet/bolt in plate for the former A/C oval hole on the firewall to hold the quick disconnect connector. It also includes a complete custom charge harness and thru-firewall battery connectors adding more quick disconnect features to this harness. This harness is perfect for someone who wants the option of very easily removing the engine bay wiring and also everything they need wiring wise to start their car up. Not to mention a very shiny firewall connector.
:: INFO I NEED FROM YOU ::
Alternator type
Distributor Type
ECU Type
Injector type
Intake Manifold Type
Vehicle Model
Vehicle Type
Vehicle Year
If the OBD setup does not correspond to the chassis of the vehicle i must know!!
:: PAYMENT & PRICE ::
Original Price from Chase $890 I am asking $680!!!! That's $210 off the original price.
Payment will be Sent to me and harness will be delivered from Chase (You can call Chase To confirm)
Before i did not require payment until the harness was done. But not ANYMORE
Since this will be made to the Buyers SPECS I want payment FIRST. Reason for this is i don't want to give chase the specs and have him build the harness to find out the buyer now wants to flake & now im stuck again with a harness built to someone else specs.
:: PICS ::
These were taken off his site so you have an idea of what to expect & Yes you get the Mil-Spec Plate also
Mil-Spec plate you will receive
Braided loom harness you will receive (these don't show the Mil-Spec connector)
& how the Mil-Spec connector looks like with braided loom (Sexy)
:: QUESTIONS ::
Any Other Questions Please contact me. My Personal Cell will be given to the Buyer so we can keep in contact.
-Jose
I purchased a harness from chase a while back, my engine was stolen before i received the harness. So i am selling the harness i originally purchased from chase at a discounted price so i can get rid of it faster. since it wasn't selling chase agreed to make a new one to the buyers specs in order for me to make a quick sell.
Since he has to start from scratch for the fastest turn around time i recommend having it done with Braided loom rather than heat shrink (i think the braided loom looks nicer, Check out my build thread for pics of loom)
:: SPECS ::
The harness You are purchasing is the B-Series CM2 harness
The CM1 v2 harness features all new commercial grade high heat wire (rated from -49° to +257° F), individually striped for easy identification and all new sensor plug pins. It is covered in full flame retardant nylon sleeving (Operating Temperature Range -103° to 257°F; Melt temp 446°F), and adhesive lined heat shrink. All engine harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind. It has a lot of R&D done for proper wiring technique, with all shielded wire used where needed. It features a stealthy look but is also easily accessed, keeping the motor easily worked on. This harness is a great start for someone looking to clean up their engine bay and replace the used or worn down stock harness.
CM2 Harness – The CM2 harness features all the same great aspects and design of the CM1 harness but adds a Mil Spec quick disconnect firewall connector and Raychem connector boot. With the CM2 K series harness you get an additional option for harness routing, which is through the valve cover and out the back side of the motor. If you choose this option it will include a free rivet/bolt in plate for the former A/C oval hole on the firewall to hold the quick disconnect connector. It also includes a complete custom charge harness and thru-firewall battery connectors adding more quick disconnect features to this harness. This harness is perfect for someone who wants the option of very easily removing the engine bay wiring and also everything they need wiring wise to start their car up. Not to mention a very shiny firewall connector.
:: INFO I NEED FROM YOU ::
Alternator type
Distributor Type
ECU Type
Injector type
Intake Manifold Type
Vehicle Model
Vehicle Type
Vehicle Year
If the OBD setup does not correspond to the chassis of the vehicle i must know!!
:: PAYMENT & PRICE ::
Original Price from Chase $890 I am asking $680!!!! That's $210 off the original price.
Payment will be Sent to me and harness will be delivered from Chase (You can call Chase To confirm)
Before i did not require payment until the harness was done. But not ANYMORE
Since this will be made to the Buyers SPECS I want payment FIRST. Reason for this is i don't want to give chase the specs and have him build the harness to find out the buyer now wants to flake & now im stuck again with a harness built to someone else specs.
:: PICS ::
These were taken off his site so you have an idea of what to expect & Yes you get the Mil-Spec Plate also
Mil-Spec plate you will receive
Braided loom harness you will receive (these don't show the Mil-Spec connector)
& how the Mil-Spec connector looks like with braided loom (Sexy)
:: QUESTIONS ::
Any Other Questions Please contact me. My Personal Cell will be given to the Buyer so we can keep in contact.
-Jose
Last edited by Ramirez428; 10-26-2009 at 08:47 AM.
#3
Honda-Tech Member
Re: ChaseBays Harness built to your Specs!!
this is a great deal. Bump because i support the great customer service you and Chase will provide for the new potential owner. Good luck with your sale.
Last edited by gfunkmos37; 10-26-2009 at 01:14 AM. Reason: grammar
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Bay Area
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Re: ChaseBays Harness built to your Specs!!
BUMP for $210 off original price!!!!!!!!!!!!
Thank you sir
thanks!!
thanks!!
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Bay Area
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Re: ChaseBays Harness built to your Specs!!
Replied to all pm's once more
Many pm's but no money yet, who will be the first??? Tune on next time for the final conclusion!!!............I'm bored lol
Many pm's but no money yet, who will be the first??? Tune on next time for the final conclusion!!!............I'm bored lol
Thread
Thread Starter
Forum
Replies
Last Post
Pandahatch
Welding / Fabrication
4
12-27-2006 08:08 PM
bay, chase, chasebays, cm2, connector, connectors, disconnect, engine, harness, honda, mil, plugs, quick, replacement, spec