, brake parts, tuck kit etc, master cylinder, booster, pads
 

Ok, I'll list everything I can remember...
ALL PRICES ARE OBO - all prices do not include shipping or insurance... Message with questions or offers!
(this stuff must sell... ! Make an offer! )

-
-Brake "tuck" , -$175
with rigid flare tool and extra 3an hardline fittings (all items shown in picture at the bottom) I did my own variation of a brake tuck. Removed prop valve and added adjustable. This will have 1 brake line riding the rear firewall. "F" -an fitting to tie rear lines info prop valve. Should work with all Integra / most civic MC's with out bending...
Various other parts Master Cylinder 10mm to 3an fittings. PTFE flex hose from wheel well to calipers, (2) 6an hardline fittings, (2) 3an Union fittings with nuts, (4) 3an hardline
fittings - All brake hardline I already flared / bent has some Raychem on them... (I got bored and had it laying around.. it was a PAIN to install! )
(This is a complete kit... You have enough hardline leftover to re-do what you desire - the tubing bender and flare ridgid tool (These items cost 150+ by themselves)
*if sold separately...*
Ridgid 377 (37* flare tool) - $75 shipped (will come with tubing cutter)
Imperial 3/16 tubing bender - $20 shipped.
-Stock 95 Integra rear calipers - $40
-Rsx rear calipers for Integra/civic big brake upgrade.. $80
Comes with calipers, rotors and pads used for 1k miles.. Hawk hps plus pads
***These have recently been completely rebuilt - By me -
-Lucas 30wt break in oil 6quarts -$30
-6 quarts brad penn 10w40 oil - $30

-Summit 200mj CDI/ Coil - $80 ( coil wires have raychem sleeved - braided mesh wire and grounding lead to cancel any unwanted interfere)
-Stock 95 Integra front brake calipers - $40
-Hawk Performance HB245F.631 (95 integra front brake pads) $40 new
- Integra Brake Booster / MC $60 (non abs - 15/16mc) This came off a 95 RS

https://cimg7.ibsrv.net/gimg/honda-t...41a9f36da1.jpg
Brake "tuck" , -$275 with rigid flare tool and extra 3an hardline fittings (all items shown in picture at the bottom) I did my own variation of a brake tuck. Removed prop valve and added adjustable. This will have 1 brake line riding the rear firewall. "F" -an fitting to tie rear lines info prop valve. Should work with all Integra / most civic MC's with out bending...


https://cimg8.ibsrv.net/gimg/honda-t...f5cadd2f92.jpg
Stock 95 Integra rear calipers - $40


https://cimg9.ibsrv.net/gimg/honda-t...5654ec4940.jpg
Rsx rear calipers for Integra/civic big brake upgrad.. $100 Comes with calipers, rotors and pads used for 1k miles.. Hawk hps plus pads


https://cimg1.ibsrv.net/gimg/honda-t...d160cdbc7a.jpg
Lucas 30wt break in oil 6quarts -$40


https://cimg2.ibsrv.net/gimg/honda-t...94369b3ebe.jpg
6 quarts brad penn 10w40 oil - $40


https://cimg0.ibsrv.net/gimg/honda-t...b473086c1c.jpg
Another picture of brake lines


https://cimg3.ibsrv.net/gimg/honda-t...d1d8dacf95.jpg
Summit 200mj CDI/ Coil - $80 ( coil wires have raychem sleeved - braided mesh wire and grounding lead to cancel any unwanted interfere)
https://cimg0.ibsrv.net/gimg/honda-t...4e3e72888b.jpg
Stock 95 Integra front brake calipers - $40

https://cimg2.ibsrv.net/gimg/honda-t...d1286c963f.jpg
Rigid 37 flare tool, imperial 3/16 tubing bender, custom jig to straighten ss tube, (4) 3/16 female an fittings for tube, (2) 6an tube fittings, (2) earls master cylinder -an fittings, and 5-6ft of 3/16 ss brake line.. All these items included in brake tuck pricing above! ! !

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

Make an offer!

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

Some really good stuff up there peps!!! Flaring tool.. Custom Brake lines... Calipers! Make an offer... ANY OFFER ... Just note.. I will not lose money to shipping. so Cover shipping expense complete + offer and see if I accept!

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

what size rotor for the rear calipers? direct bolt on for ek/eg/dc rear trailing arms?

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

They are 4/100 mount (4 lug stock wheels) and 10.2" in diameter ( the RSX Setup at least). Just remember with the RSX big brake upgrade it's a little tricky getting the bled down correctly the first time.
Not 100% familiar with EKs but should be a bolt on affair with EG's DC's...


Anything else let me know.

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

1 ITEM SOLD..

No one needs that Ridgid flare tool.. ? Make an offer.. Still in pristine condition. Works great.


Those Hawk brake pads are brand new in box.. Can't beat that price.. If you can find it cheaper.. I'll cut pricing 50%! Thats a deal too!

Oil's always good to have or try.. Let me know if there's a cheaper price on something and make an offer!

LAst bit of the dregs I got left.

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

PMed

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

Still got some good brake parts left... stock from integra calipers.. RSX rear calipers (recently rebuilt *less than 2k*) with ep3 civic rear rotor's and hawk brake pads (LEss than 2k miles)

Ridgid 37* flare tool... lemme know! Everything must go. I'll entertain any offers!

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

adjusted some prices... all this stuff's gotta go........

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

Still got some stuff.. message me with questions or offers!

Re: , brake parts, tuck kit etc, master cylinder, booster, pads
 

woot.. More stuff sold... Not much left!