Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners
01-18-2004, 05:33 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners
GUY FLAKED ON THIS HEAD...back up for sale guys 
Please pm or email me questions about the head and ITB's
Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners
Well, time to help out a couple of other friends sell their amazing stash of goodies. Let's start out with the infamous Jerry aka Jerry Built aka Jerry the race car driver. Jerry's been racing cars since most of us were learning how to walk. Item up for sale is his very own Jerry Built/Joe Alaniz square ported 2001 GSR head. This head put down 262 whp and 174 ft. lbs of torque...Dyno graph is pictured below. Head has been ported, polished, 3 angle valve job, milled 3 thousandths (if that), port matched by Joe Alaniz himself. Head will come with Alaniz valve train, Super tech oversized flat top nitride treated valves (intake and exhaust), Hondata custom square port intake manifold gasket, square port matched TWM ITB's with fuel rail, RC 440 injectors, throttle cable, Fuel pressure regulator and gauge (not pictured for now), cam caps, rails and stock valve cover. Head DOES NOT come with distributor and CAMS.
Dyno graph...sickne$$
TWM ITB g00dne$$
More TWM ITB g00dne$$
Juicy square port work
Square ports are calling your name out...buy me!! buy me!!
Super tech valves
ITB's to go
Nice butterfly
Price for all the Jerry Built/Alaniz ported head $4,200...do the math on the labor, injectors, valves...etc., cost is much MORE than $4,200.
The following parts belong to my other friend who's being forced to move out by his mom...sucks...he has more g00dies for sale. We finally got to empty his storage unit and this is what we found:
Stock cable LS Diff with ring gear $50
JDM Del Sol gauge cluster $200
Empty cable tranny case with speed sensor $200
EF rear mount for B-series swap $30
EG rear mount for B-series swap $30
Custom header 4-1 for B-series motor...can be modded to accept 2.5" collector $150
EG Spoon N1 style (ES-muffler) muffler...axleback with mandrel bent piping $60
Brand new '99-2000 Si core support $150
Sprint Hart Tuner rims $1,000
Aftermarket muffler $40
Stock EG muffler $40
CRX sunroof assembly $60
Stock CRX sunroof hatch $40
B20 $30 and '99 Si $40 crank pulleys
Various sensors for sale, TPS $20, MAP $20, Type R IACV $30, MAP $20, Stock fuel pressure regulator with O-ring $15, OBD-0 VTEC solenoid $60 Resistor box $35, Sticker not for sale.
GSR seats $200
NEW ITEM = CTR INTAKE CAM $200
NEW ITEM = Hondata S100 new in box
Brand new Hondata S100 in the box $230 (no pictures yet)
All Prices above don't include shipping costs.
Modified by acydphryck at 7:52 AM 1/19/2004
Modified by acydphryck at 7:53 AM 1/19/2004
Modified by acydphryck at 5:33 PM 1/19/2004
Modified by acydphryck at 5:37 AM 1/24/2004
Modified by acydphryck at 8:00 AM 2/5/2004
Please pm or email me questions about the head and ITB's
Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners
Well, time to help out a couple of other friends sell their amazing stash of goodies. Let's start out with the infamous Jerry aka Jerry Built aka Jerry the race car driver. Jerry's been racing cars since most of us were learning how to walk. Item up for sale is his very own Jerry Built/Joe Alaniz square ported 2001 GSR head. This head put down 262 whp and 174 ft. lbs of torque...Dyno graph is pictured below. Head has been ported, polished, 3 angle valve job, milled 3 thousandths (if that), port matched by Joe Alaniz himself. Head will come with Alaniz valve train, Super tech oversized flat top nitride treated valves (intake and exhaust), Hondata custom square port intake manifold gasket, square port matched TWM ITB's with fuel rail, RC 440 injectors, throttle cable, Fuel pressure regulator and gauge (not pictured for now), cam caps, rails and stock valve cover. Head DOES NOT come with distributor and CAMS.
Dyno graph...sickne$$
TWM ITB g00dne$$
More TWM ITB g00dne$$
Juicy square port work
Square ports are calling your name out...buy me!! buy me!!
Super tech valves
ITB's to go
Nice butterfly
Price for all the Jerry Built/Alaniz ported head $4,200...do the math on the labor, injectors, valves...etc., cost is much MORE than $4,200.
The following parts belong to my other friend who's being forced to move out by his mom...sucks...he has more g00dies for sale. We finally got to empty his storage unit and this is what we found:
Stock cable LS Diff with ring gear $50
JDM Del Sol gauge cluster $200
Empty cable tranny case with speed sensor $200
EF rear mount for B-series swap $30
EG rear mount for B-series swap $30
Custom header 4-1 for B-series motor...can be modded to accept 2.5" collector $150
EG Spoon N1 style (ES-muffler) muffler...axleback with mandrel bent piping $60
Brand new '99-2000 Si core support $150
Sprint Hart Tuner rims $1,000
Aftermarket muffler $40
Stock EG muffler $40
CRX sunroof assembly $60
Stock CRX sunroof hatch $40
B20 $30 and '99 Si $40 crank pulleys
Various sensors for sale, TPS $20, MAP $20, Type R IACV $30, MAP $20, Stock fuel pressure regulator with O-ring $15, OBD-0 VTEC solenoid $60 Resistor box $35, Sticker not for sale.
GSR seats $200
NEW ITEM = CTR INTAKE CAM $200
NEW ITEM = Hondata S100 new in box
Brand new Hondata S100 in the box $230 (no pictures yet)
All Prices above don't include shipping costs.
Modified by acydphryck at 7:52 AM 1/19/2004
Modified by acydphryck at 7:53 AM 1/19/2004
Modified by acydphryck at 5:33 PM 1/19/2004
Modified by acydphryck at 5:37 AM 1/24/2004
Modified by acydphryck at 8:00 AM 2/5/2004
01-18-2004, 05:45 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (SLOW4drINTEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SLOW4drINTEG »</TD></TR><TR><TD CLASS="quote">thats some crazy port job... 
</TD></TR></TABLE>
thanks buddy...i can't believe i got to drive Jerry's car once to get his tires changed...stalled it like 3 times going to the tire shop and back. shop was 2 blocks away from ImportBuilders. ITBs owned me...they're not meant for daily driving unless you're Jerry
</TD></TR></TABLE>thanks buddy...i can't believe i got to drive Jerry's car once to get his tires changed...stalled it like 3 times going to the tire shop and back. shop was 2 blocks away from ImportBuilders. ITBs owned me...they're not meant for daily driving unless you're Jerry
Trending Topics
01-18-2004, 08:41 PM
#8
Join Date: May 2003
Location: socal, Ca, USA
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (acydphryck)
I saw all this when I went to pick my engine up, believe me it is well worth it no doubt.
01-18-2004, 08:42 PM
#9
I really don't know
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (acydphryck)
wow, impressive,
that head and ITBs for 4200? seems like a really good price.
I wonder how many people on honda-tech have a motor built enough to use the worthyness of that head...
and a bump for Jerry,
that head and ITBs for 4200? seems like a really good price.
I wonder how many people on honda-tech have a motor built enough to use the worthyness of that head...
and a bump for Jerry,
01-18-2004, 08:54 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (JBLSVTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JBLSVTEC »</TD></TR><TR><TD CLASS="quote">I saw all this when I went to pick my engine up, believe me it is well worth it no doubt.</TD></TR></TABLE>
thanks JB...
thanks JB...
01-18-2004, 08:55 PM
#11
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (JDM EK9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM EK9 »</TD></TR><TR><TD CLASS="quote">wow, impressive,
that head and ITBs for 4200? seems like a really good price.
I wonder how many people on honda-tech have a motor built enough to use the worthyness of that head...
and a bump for Jerry, </TD></TR></TABLE>
yea...that's what i was thinking...i wonder how many motors here on ht.com is built enough for this head
that head and ITBs for 4200? seems like a really good price.
I wonder how many people on honda-tech have a motor built enough to use the worthyness of that head...
and a bump for Jerry, </TD></TR></TABLE>yea...that's what i was thinking...i wonder how many motors here on ht.com is built enough for this head
01-18-2004, 09:29 PM
#12
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (jerseykid609)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jerseykid609 »</TD></TR><TR><TD CLASS="quote">holy **** thats a crazy port and price bump for you </TD></TR></TABLE>
Jerry says thanks
Jerry says thanks
01-18-2004, 10:54 PM
#14
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (acydphryck)
ttt....just added a BUNCH of new parts for this week
01-19-2004, 12:03 AM
#16
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (97Lude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97Lude »</TD></TR><TR><TD CLASS="quote">free bump for a bud, great seller </TD></TR></TABLE>
thanks
</TD></TR></TABLE>thanks
01-19-2004, 07:17 AM
#18
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (Tbone)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone »</TD></TR><TR><TD CLASS="quote">I'll trade him a brand new Dart block for the head ..lol</TD></TR></TABLE>
LOL....funny Tbone...no soup for you!
what happened with the Dart block project?
LOL....funny Tbone...no soup for you!
what happened with the Dart block project?
01-19-2004, 08:28 AM
#20
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (acydphryck)
here's a list of parts from last week in his house that's for sale:
https://honda-tech.com/zerothread?id=732045
Flywheel, FPR, built short block and Fluidyne radiator sold last week...still have lots of parts to sell
https://honda-tech.com/zerothread?id=732045
Flywheel, FPR, built short block and Fluidyne radiator sold last week...still have lots of parts to sell
01-19-2004, 09:43 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (Manuel)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Manuel »</TD></TR><TR><TD CLASS="quote">U got PM</TD></TR></TABLE>
replied
replied
01-19-2004, 09:51 AM
#23
Member
Join Date: Nov 2001
Location: 21,419 useless posts So. Cali., USA
Posts: 3,151
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 »</TD></TR><TR><TD CLASS="quote">What tranny is that?</TD></TR></TABLE>
01-19-2004, 12:02 PM
#24
Honda-Tech Member
Thread Starter
Join Date: Sep 2001
Location: socal, ca, US
Posts: 6,067
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (1)
the tranny case is a '92-'93 YS1 cable tranny...you can put hydro gearing in the case
01-19-2004, 12:28 PM
#25
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alaniz square ported 2001 GSR head, TWM ITB's, TPS/Map sensors, SH Tuners (acydphryck)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by acydphryck »</TD></TR><TR><TD CLASS="quote">
LOL....funny Tbone...no soup for you!
what happened with the Dart block project?</TD></TR></TABLE>
I'm talking about another dart block I have , a brand new tall deck.
I finished my dart build, put down 238 whp 160+tq with 14 bent valves.(Without itb's and full exhaust with cat) I'm just waiting on my new valves to get that one running.
LOL....funny Tbone...no soup for you!
what happened with the Dart block project?</TD></TR></TABLE>
I'm talking about another dart block I have , a brand new tall deck.
I finished my dart build, put down 238 whp 160+tq with 14 bent valves.(Without itb's and full exhaust with cat) I'm just waiting on my new valves to get that one running.