2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!!
#1
Thread Starter
Join Date: Jan 2004
Location: SCal, CA, USA
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!!
Thats it!! Its on eBay! NO RESERVE!!! Goin to the highest bidder!
Check it!
http://cgi.ebay.com/ebaymotors...wItem
Dont let this smokin deal and BEAST of an engine pass you up!
This motor will run 11's in a Street car easily and 10s in a gutted races car NA!
What you will see next is a SERIOUS speciman of Hondas best NA Potential. This is the motor that I have been secretely building for my DC for the past 2-3yrs. Again, since I sold my car and am now getting out of the whole Honda scene I no longer have any use for this engine but Im sure someone out there will!
Im also sure that anyone into NA beasts will come to appreciate this engine for what it is and what it can be.
Head was ported by Darrel *** who runs the Mopar Sport compact drag program. He also used to do the porting for Sean Gann until he got the mopar program in 2001. The valve job was done by Blake Gann the brother of Sean Gann who pilots the Oakley Pro Stock Bike. Blake does his brothers valve jobs and not that many others..he also does Jeggs I believe but thats not for public consumption...the Valves are REV SS +1mm swirl polished. the Dual valve Springs and TI retainers are also REV, the springs were custom set up for my retarded off the wall set up by Ralph @REV and are not shelf pieces.
It is a P72 Head and it will be COMPLETE with all cam caps, loss motion assembly, VTEC solenoid etc.!
Last but certainly not least is the 2.0 monster that I have been secretly building for the past 2-3yrs. Some of you know about this motor as I have told you of its exsistance but none of you have seen it in its reality.
The bottom end consists of a Golden Eagle Godzilla sleeved 85mm 1.8 liter block with a 1 inch Golden Eagle deck plate. The stroke length is 89mm with a 13:5:1 compression ratio utilizing custom forged Arias Pistons connected to custom forged Ultra lite Cunnigham rods. Rod length is 6.3770". The rod ratio is 1.82 & Bore to stroke ratio is 0.95 to 1. Volume at TDC is 47.61cc and the Swept Volume is 504.68.
Block comes with a custom 85mm Cometic head gasket & AEBS head studs. All new Honda OEM bearings were used in the assembly as they are the best...better than ACL. As a matter of fact...Winston Cup cars use Honda bearings in their motors!
This motor will produce well over 275+hp to the wheels in the right hands with the right tuning. No short cuts were taken, and the pictures of the quality work speaks again for themselves. Enjoy!
Modified by NA-Cutie at 9:30 PM 10/25/2005
Check it!
http://cgi.ebay.com/ebaymotors...wItem
Dont let this smokin deal and BEAST of an engine pass you up!
This motor will run 11's in a Street car easily and 10s in a gutted races car NA!
What you will see next is a SERIOUS speciman of Hondas best NA Potential. This is the motor that I have been secretely building for my DC for the past 2-3yrs. Again, since I sold my car and am now getting out of the whole Honda scene I no longer have any use for this engine but Im sure someone out there will!
Im also sure that anyone into NA beasts will come to appreciate this engine for what it is and what it can be.
Head was ported by Darrel *** who runs the Mopar Sport compact drag program. He also used to do the porting for Sean Gann until he got the mopar program in 2001. The valve job was done by Blake Gann the brother of Sean Gann who pilots the Oakley Pro Stock Bike. Blake does his brothers valve jobs and not that many others..he also does Jeggs I believe but thats not for public consumption...the Valves are REV SS +1mm swirl polished. the Dual valve Springs and TI retainers are also REV, the springs were custom set up for my retarded off the wall set up by Ralph @REV and are not shelf pieces.
It is a P72 Head and it will be COMPLETE with all cam caps, loss motion assembly, VTEC solenoid etc.!
Last but certainly not least is the 2.0 monster that I have been secretly building for the past 2-3yrs. Some of you know about this motor as I have told you of its exsistance but none of you have seen it in its reality.
The bottom end consists of a Golden Eagle Godzilla sleeved 85mm 1.8 liter block with a 1 inch Golden Eagle deck plate. The stroke length is 89mm with a 13:5:1 compression ratio utilizing custom forged Arias Pistons connected to custom forged Ultra lite Cunnigham rods. Rod length is 6.3770". The rod ratio is 1.82 & Bore to stroke ratio is 0.95 to 1. Volume at TDC is 47.61cc and the Swept Volume is 504.68.
Block comes with a custom 85mm Cometic head gasket & AEBS head studs. All new Honda OEM bearings were used in the assembly as they are the best...better than ACL. As a matter of fact...Winston Cup cars use Honda bearings in their motors!
This motor will produce well over 275+hp to the wheels in the right hands with the right tuning. No short cuts were taken, and the pictures of the quality work speaks again for themselves. Enjoy!
Modified by NA-Cutie at 9:30 PM 10/25/2005
#4
Thread Starter
Join Date: Jan 2004
Location: SCal, CA, USA
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-blizzard »</TD></TR><TR><TD CLASS="quote">get out your pennies guys, </TD></TR></TABLE>
Break open them piggy banks!
Break open them piggy banks!
#5
Honda-Tech Member
Join Date: Sep 2003
Location: cant get more west than this, Cali., us
Posts: 2,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
take that hammer to that piggy bank guys
this is the best thing your going to buy for the price
this is the best thing your going to buy for the price
#7
Honda-Tech Member
iTrader: (2)
Join Date: Nov 2002
Location: San Pedro, CA
Posts: 11,076
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dj_seloe »</TD></TR><TR><TD CLASS="quote">take that hammer to that piggy bank guys
this is the best thing your going to buy for the price
</TD></TR></TABLE>Oh chit Celo
why did'nt you call me back to let me know if you wanted me to drive the crx??
this is the best thing your going to buy for the price
</TD></TR></TABLE>Oh chit Celo
why did'nt you call me back to let me know if you wanted me to drive the crx??
Trending Topics
#10
Thread Starter
Join Date: Jan 2004
Location: SCal, CA, USA
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMisGOOD »</TD></TR><TR><TD CLASS="quote">fix your link!
BUMP</TD></TR></TABLE>
Thanks for catching that! Sorry! Link Fixed!
Again
http://cgi.ebay.com/ebaymotors...wItem
BUMP</TD></TR></TABLE>
Thanks for catching that! Sorry! Link Fixed!
Again
http://cgi.ebay.com/ebaymotors...wItem
#12
Honda-Tech Member
Join Date: Sep 2004
Location: West Coast
Posts: 5,125
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by antiricemilitia »</TD></TR><TR><TD CLASS="quote">Badass setup....whoever gets this beast wont be disappointed </TD></TR></TABLE>
thats a pretty nice head and block
thats a pretty nice head and block
#16
Member
Join Date: Sep 2004
Location: San Jose, CA, USA
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NA-Cutie »</TD></TR><TR><TD CLASS="quote">
SERIOUS speciman of Hondas best NA Potential. </TD></TR></TABLE>
SERIOUS speciman of Hondas best NA Potential. </TD></TR></TABLE>
#21
Thread Starter
Join Date: Jan 2004
Location: SCal, CA, USA
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by White Smoke »</TD></TR><TR><TD CLASS="quote">Bump for ebay and a beast that deserves better </TD></TR></TABLE>
well put
well put
#24
Thread Starter
Join Date: Jan 2004
Location: SCal, CA, USA
Posts: 6,717
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.0 Liter NA Beast!! 275+HP Potential!! on eBay NOW!! NO RESERVE!!! Highest Bidder WINS!! (NA-Cu
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DRAPESTER »</TD></TR><TR><TD CLASS="quote">bid!</TD></TR></TABLE>