[*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
if your interested in anything, PM me or email me @ frightmare@atlanticbb.net i DONT check this website daily so if it takes me a day to reply to a PM im sorry.
ill be updating this thread as i find more things to either sale or part with but for now i have this, please bump me if you read me... ________ civic EK ARC induction box with top and bottom filters. note these are the paper filters that ARE CLEANABLE! these are not the foam filters. the top filter was bought brand new a few years ago and has about a total of 200 miles on it. its dusty from being in the basement. the bottom filter will need cleaned. it is dirty. K&N filter cleaner will work on these! its snowing here in PA so i wasnt able to take this outside and hose it off & clean it all up for the pics. the unit is dirty but will clean up nicely. the mounting brackets are a bit rusty and need some tlc to bring back the shine. the black spot on the side is where the upper rad hose was rubbing it, its just dirty. i know i should have cleaned this up before snapping pics. https://farm6.static.flickr.com/5019...a4cca453d0.jpg https://farm6.static.flickr.com/5139...e463df6726.jpg https://farm6.static.flickr.com/5093...b34f6149db.jpg https://farm6.static.flickr.com/5219...742a098618.jpg arc EK induction box: $320 postage paid ________ msd 6btm w/blaster ss coil and distributor cap (for the gsr)... with some how-to install instructions i dug up: http://www.pirate4x4.com/forum/showthread.php?t=721133 https://farm6.static.flickr.com/5137...a04dfc9eaa.jpg https://farm6.static.flickr.com/5134...3e7186b9f3.jpg https://farm6.static.flickr.com/5058...a2d785991e.jpg https://farm6.static.flickr.com/5296...d190decccd.jpg MSD with blaster and distrib cap: $300 postage paid ________ 99-00 civic heater blower & motor with ac delete duct. this is the parts needed to convert your 96-98 wire controlled heater system to the 99-00 electric controlled system. please note that the 99-00 dash harness will be needed as well as the 99-00 control unit (not included, items can be had on ebay for a reasonable price) the items pictured are the ones you will receive, they are a bit dusty. https://farm6.static.flickr.com/5140...c50a8bccbd.jpg https://farm6.static.flickr.com/5068...f951ee22dc.jpg https://farm6.static.flickr.com/5011...febda1dfc1.jpg https://farm6.static.flickr.com/5256...dbea5553b7.jpg https://farm6.static.flickr.com/5065...54abeb7ca6.jpg https://farm6.static.flickr.com/5299...bbd195620f.jpg 99-00 civic heater blower, motor & ac delete duct: $100 pickup [buyer pays shipping] ________ ________ canards - sold ek4 navigation units - sold spoon mcs/mcb - sold. chargespeed ek rear lip - sold fuel rail & fpr - sold integra master & booster - sold infinity kappa 6x9's - sold |
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
ttt
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
Bump.
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
BUMP
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
charespeed lip pending :thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
chargespeed ek rear lip - sold.
ttt. :) |
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
updated the first post with some new things.
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
Good stuff. Been eyeing them first molding canards for a while now
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
wats the lowest ull take on the arc box
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
pm'd
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
ttt
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
ttt
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
also have the msd 6btm w/blaster ss coil and distributor cap, no rotor (for the gsr)...
http://www.msdignition.com/Pro....aspx http://www.shopatron.com/produ...0.0.0 http://www.shopatron.com/produ...0.0.0 ill snap pics of it later... asking $350 shipped. (came with my old gsr swap i never used the ignition) |
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
also have the msd 6btm w/blaster ss coil and distributor cap, no rotor (for the gsr)...
http://www.msdignition.com/Pro....aspx http://www.shopatron.com/produ...0.0.0 http://www.shopatron.com/produ...0.0.0 ill snap pics of it later... asking $350 shipped. (came with my old gsr swap i never used the ignition) |
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
updated the first post with msd pics.
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
bump.
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
bump me if ya read me :)
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
bump.
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
:thumbup:
|
Re: [*fs*] ek/j parts. spoon, first molding, hop, salute your shorts
UP! bump me if ya read me!!
|
All times are GMT -8. The time now is 03:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands