iwannarace

I have a chance to pick up a bunch of large lexan plates for less than half-off retail prices. I'm just not sure what I would use it for. Thoughts? I can make my own blackbird fabworx style wing for the teg, but I'm not sure what else to do.

dirty19

iTrader: (1)

Depending on the sanctioning body you run in, you can replace your teggy's side windows reducing weight.
Where are you in the bay? I might wanna reduce my EG's weight some more

iwannarace

Livermore. I went ahead and picked up about 32sqft for $100. Figured I'd find a use for it sooner or later.

dirty19

iTrader: (1)

I used to live in Livermore up till a few months ago.
32 SQ FT?
That's a lot.
How thick is it?

iwannarace

3mm

killerpenguin21

sheet lexan is a pain in the *** to use for anything thats not a flat window. there is a company in the uk that makes formed direct replacement windows, for like 500 bucks shipped (i run them on my integra)

dirty19

iTrader: (1)

Should be sufficient thickness not to crack if its not tightened down too tight.
Rivnuts would work I believe..

DaIll1

If you want to do you back glass, just place a slightly larger piece on said, well supported window and slowly warm and cool it. Don't try to heat it with heat gun or torch.