chad

Only post for sale ad's of RACE PARTS
NO WTB

DO NOT REPLY TO A POST.....PM the person....Keep this thread free of banter....just FOR SALE Posts


Must have:
Picture
Contact
Location
Price

Chad

EauRouge

I have a set of red Willans 6pt harnesses for sale. They are in good condition. Since the belts are expired, they cannot be used for a race car, but are good for a street or track car. Asking $80 shipped. Paypal accepted. Located in West LA, CA.

SOLD

The Destroyer

SOLD.

JDM_JNKY

iTrader: (4)

Just the bracket alone from FBs is $400
Then rotors $100 + redrill.
Calipers $350 + rebuild and Powder coat
SS lines $50
Hub centric ring/spacer $100
New pads $100
-------------------------------------------------------
Over $900 in goods for $650 shipped

Joel 909-728-9967

Fast Brakes Acura RL Brake Conversion for 88-00 Civic/90-01 Integra ( exc. R )
**Instructions & Hardware Included**
**I have all the receipts**
• Clears some 16's ex. Te37, Rega EVO's, high disk setups. 17's recommended !

$650 Shipped OBO
*05-06 Acura RL 4 Piston Brakes ( Rebuilt by Mechanic)
*Brand New - Type S 11.8" X-Dimpled & Slotted Rotors Redrilled 4x100
*Brake Pads ( Driven On for less than a 1000 miles Plenty Meat )
*Yellow Powder Coating (by Central Florida PowderCoating}
*Steel Braided Brake Lines
*20mm Hub Centric Spacers
*Everything is in mint working condition

JOHN WAYNE

iTrader: (1)

For Sale in Maryland.

Special Projects Motorsports Front Air Damn/Splitter kit for 98-01 Integra.

Never been raced on, only mounted/test fitted.

Comes with all hardware and brackets, but does NOT come with Splitter/Undertray (you can make your own for super cheap (and will probably need to make more than one!)

SOLD

GI8U2racing

edited.

sander

Remember, this is a thread for individuals to buy and sell parts. If you are manufacturing "kits", there is a vendor section for that.

hondastreet

cheap price 700$ + SHIPPING + PAYPAL FESS for a FAST sale

12,3'' front diameter size, two pieces rotors
most of 15'' rims can fit like team dynamic and TE37
CTR don't fit
all 16'' rims fit
4x100 bolts pattern

list of materiel
4 front pads
2 rotors assembled with hub
2 caliper

fit for all
integra 94-01, maybe except type R (don't know)
acura 1.6 el 96-00

may be civic 88-00
may be integra 87-93
may be CRX

hondastreet

fs : front type r caliper 94-01 - 120$+shipping+paypal
fs : rear rsx type s caliper 02-04 - 50$+shipping+paypal
fs : type S k20 intake manifold -120$+shipping+paypal
fs : front type r sway bar with red polyeurethane -100$+shipping+paypal

MSchu

Koni 2812 long body shocks... two front two rear. came off of a CS2 chassis, but I am sure they can work on other chassis. great condition.



Contact: MSchu18 at yahoo dot com
Location: Las Vegas, NV
Price: Negotiable... pair $4,000 new... looking for $2,700 or so...

denverjdm

Prices.

Cimburke23

Name: chris
Location: chester, VA
Means of contact: PM
Price: $650 OR BEST OFFER need sold ASAP
only trades would be an OBX LSD+cash

Description: I have a used cusco LSD that i bought but decided i want a gear type instead of a clutch type LSD for my drag car.

pictures:

Rzoops

I pieced together a seat hardware kit because I didn't want to pay $10 plus shipping for a few bolts from Sparco. I include the essential hardware to successfully mount your fixed back seat to a pair of side mounts, and also the hardware to fasten your side mounts to the seat bracket itself. You will re-use your factory bolts to secure the bottom mount to the chassis.

Grade 12.9 allen-head bolts are used along with appropriate washers and nylon lock nuts. I have tested this hardware to suit various popular brands of seats, including Recaro, Sparco, Status Racing, and F1 Spec. It will likely fit more. Below is a picture of my Recaro SPG mounted in my personal track car using this same hardware set.

Note: This hardware kit is not intended for use with sliders or bottom-mount seats, such as popular reclining styles. Please send me a message with any additional questions.

20 HARDWARE PIECES TOTAL, for ONE fixed back, side mount seat. Brackets, side mounts, and seat not included.

$8 shipped via USPS per set.

0Innes

iTrader: (3)

got a couple of parts for sale

email James@IPGParts.com
phone 407-324-4684

avid engine mounts, b series into EG/DC - Black -- $215/set
http://www.ipgparts.net/store/Used-A...ne-Mounts.html

B16 Hydro Transmission with MFactory LSD and MFactory 4.9 Final Drive -- $1375
http://www.ipgparts.net/store/Used-H...nal-Drive.html

donut.

Selling a Buddy Club Spec 2 catback exhaust system. It includes the silencer and slip joint springs. Asking $175.This exhaust was originally for a 92-95 hatchback, but the axle-back was modified/extended to fit 94-01 Integra's. The piping was also shortened to accomodate a stock 17.5" cat.
Selling because it was an impulse buy and I'm going a different route

Julio@Bisimoto

Parts laying around the shop taking up room! Everything is brand new. Prices does not include shipping.


2 sets AEM EMS 30-1900U universal stand alone with wide band $1599 each


Innovate modular tunning system #3782 DL-32 kit $449
Innovate #3742 LMA-3 Aux box $219


33 sets NGK Racing plugs R7433-9 #4660 $49.99 each set


10 sets NGK Racing plugs R5400-9 #2185 $49.99 each set


2 sets of Autometer Opic Suction Mount kit #5231 $25 each


Autometer Gauge mounting cups for 2 5/8 sized gauges #5201 $25


4 sets of Autometer replacement sender full sweep electric tempt #2252 $16.99 each


Autometer C2 Series Oil Temp electric gauge #7156 $138


Autometer C2 Series oil pressure electric gauge #7153 $189


Autometer C2 Series Volts #7191 $105


Autometer C2 Series 5" tach with shift light 0-10k rpm $249


Autometer Silver sport comp 5" tach with shift light 0-10k rpm $219


3 sets of MSD Coil single tower cpc ignition #8232 $49.99 each


2 sets of MSD black spark plug cables 1990-1997 Accord F22 $74.99 each


2 sets of Sparco hood pins #016065 $24.99 each kit


3 sets of NTK oxygen sensor #24313 $239 each


2 sets Golden Eagle Manufacturing lighter $14.99 each


Mr. Gasket Fuel pressure gauge 0-15psi new but has face slightly pushed back $5

BlueTeg

iTrader: (2)

Gabe
gortega |at| naihorizon |dot| com
Tempe, AZ

Corvette Z06 brake ducts, Brand New

I bought these because their shape lends itself very well towards a plug & play installation on most 92-00 Honda Civics. Unfortunately with some additions I made to the car last year I now have some accessories in the way.

$24 + $14 for shipping




Also, if anyone has one of the following LSDs for B18c transmission they would sell please PM me:
Spoon
oem ITR (yes...I know these are helical, but they're cheap )
MFactory (clutch-type)
Mugen (1.5 or 2.0 way)

BlueTeg

iTrader: (2)

It would appear that you are aboard the same fail boat....

cloviskilla

iTrader: (2)

hello i have one genuine sparco blue sprint seat for sale. it has no tears. it has a little grease prints but nothing deep could be easily cleaned. it has flip up brackets for easy acess to rear seat and im also include solid brackets. i am asking 100 plus shipping. thanks please call or txt anytime 5757493103 rock, im in nm.

Colin

iTrader: (1)

AUTOPOWER WINDOW NET $30
- Includes the window net and most of the needed installation accessories
- Only part that is missing are the tabs which locate the upper rod - these were welded to our roll cage, so I could not remove them. They can be purchased online, or just fabbed yourself. What you see is what you get.
- I think the net alone is normally about $30 and the mounting kit another $40

http://www.flickr.com/photos/clen/6047809763/
Please email 1colin (at) gmail or PM me. Thanks!

donut.

Greetings fellow enthusiasts,

I just recently picked up this exhaust from another H-T member and I had a change of heart, boo. I've never even installed it. Well to cut to the chase, this exhaust was originally intended to fit an EG hatch, but it has some pretty gnarly fabrication to fit a DC2. The rear axle back was extended, but you can't even tell! The mid-pipe was also shortened 5" to accommodate a USDM 17.5" Length Catalytic Converter. Sweet! I'm willing to bet my dirty drawers that you can even remove the extended part on the axle back, weld the original back, and it will fit your EG hatch! I purchased it this way for $175 and now you can have this bad boy for only $150!

LightWeightChamp

S2000 Exterior parts. Hail damage but still good for those who are doing car to car and need 2nd hand cheap exterior parts.

http://www.hondamarketplace.com/show...9#post45877849

Egezzy

iTrader: (2)

I am selling some K series stuff because I doubt I will be going that route anytime soon. So I just need to get them out of my way and pay for some seat time.


K20Z3 cams. Less than 40k on these. 125shipped.








06 TSX Exhaust cam. 75shipped.






R CREW Splitter and Brackets. I do not have a picture of the splitter blade at the moment because it is still boxed up and hiding in the back of the garage. It is all brand new, just sat around. SOLD.


ALSO NOT PICTURED.

K24A4 Shortblock. ~60k on it. 400 PICKED UP.

K Series Valve Cover. Unpainted. 55 Shipped.

petwhookie

iTrader: (-1)

ITR brake calipers, fronts only
23t bracket
Seals are good


Perfect for oem big brake upgrade.


Asking $80, priced to sell
Located: Cali

tearlessj

I have for sale a APR GT-200 wing.

SOLD